1978 - 1983 |
DX Series |
Row-Crop tractor |
Series: | DX 130 ← | DX 140 | → DX 160 |
Production | |
Manufacturer: | Deutz-Fahr |
Type: | Row-Crop tractor |
Deutz-Fahr DX 140 Power | |
PTO (claimed): | 131 hp 97.7 kW |
Deutz-Fahr DX 140 Engine | |
Deutz 6.1L 6-cyl diesel | |
Fuel tank: | 39.6 gal 149.9 L |
Engine details ... |
Mechanical | |
Chassis: | 4x2 2WD |
4x4 MFWD 4WD | |
Final drives: | planetary |
Steering: | power |
Brakes: | hydraulic wet disc |
Cab: | Cab standard with air-conditioning. |
Transmission: | 24-speed |
Transmission details ... |
Hydraulics | |
Type: | open center |
Pressure: | 2485 psi 171.3 bar |
Pump flow: | 18.0 gpm 68.1 lpm |
Tractor hitch | |
Rear Type: | III/II |
Rear lift (at ends): | 11921 lbs 5407 kg |
Power Take-off (PTO) | |
Rear PTO: | independent |
Clutch: | wet disc |
Rear RPM: | 1000 (1.75) |
540/1000*Sales literature lists a optional shiftable PTO, but the option appears to be rare. |
Dimensions & Tires | |
Wheelbase: | 111.42 inches 283 cm |
Weight: | 12171 to 13185 pounds |
Front tire: | 11.00-16 |
Rear tire: | 18.4-38 |
Full dimensions and tires ... |
Electrical | |
Ground: | negative |
Battery volts: | 12 |
1978 - 1983 |
DX Series |
Row-Crop tractor |
Series: | DX 140 ← | DX 160 |
DX 7.10 ↓ |
Nebraska Tractor Test 1307 | |||
|
Nebraska Tractor Test 1307 | |
Diesel 24-speed 2WD April 24 - May 2, 1979 Link: Nebraska Tractor Test 1307 file | |
PTO performance | |
Power at rated engine speed: | 145.41 hp 108.4 kW |
Fuel use: | 8.4 gal/hour 31.8 l/hour |
Power at rated PTO speed: | 140.99 hp 105.1 kW |
Fuel use: | 7.9 gal/hour 29.9 l/hour |
Drawbar performance | |
Max power: | 121.64 hp 90.7 kW |
Fuel use: | 8.4 gal/hour 31.8 l/hour |
Gear 3ZH used for power test. | |
Max pull: | 15172 lbs 6882 kg |
Gear 1ZH used for pull test. |
1978 - 1983 |
DX Series |
Row-Crop tractor |
Series: | DX 140 ← | DX 160 |
DX 7.10 ↓ |
Engine Detail | |
Deutz BF6L 913 | |
turbocharged diesel | |
6-cylinder | |
air-cooled | |
Displacement: | 373.9 ci 6.1 L |
Bore/Stroke: | 4.016x4.92 inches 102 x 125 mm |
Power: | 150 hp 111.9 kW |
Compression: | 15.5:1 |
Rated RPM: | 2200 |
Starter volts: | 12 |
Oil capacity: | 16.9 qts 16.0 L |
1978 - 1983 |
DX Series |
Row-Crop tractor |
Series: | DX 140 ← | DX 160 |
DX 7.10 ↓ |
Transmission | |
Transmission: | Triple Range |
Type: | partially synchronized |
Gears: | 24 forward and 8 reverse |
Clutch: | dry disc |
Oil capacity: | 79.25 qts 75.0 L |
Four gears (1-4) in three ranges (low, medium, high) with two-speed power shift. |
1978 - 1983 |
DX Series |
Row-Crop tractor |
Series: | DX 140 ← | DX 160 |
DX 7.10 ↓ |
Deutz-Fahr DX 160 Tires | |
Standard tires (ag): | Front: 11.00-16. Rear: 20.8x38 (2WD) |
Front: 14.9-28. Rear: 20.8x38 (4WD) |
Dimensions | |
Wheelbase: | 111.5 inches 283 cm |
Length: | 185.8 inches 471 cm |
Width: | 93.3 inches 236 cm |
Height: | 112 inches 284 cm |
Rear tread: | 70 to 86 inches 177 to 218 cm |
Deutz-Fahr DX 160 Weight | |
2WD : | 12171 lbs 5520 kg |
4WD : | 13185 lbs 5980 kg |
Operating: | 14840 lbs 6731 kg *Weight ith 20.8-38 duals. |
Ballasted: | 18710 lbs 8486 kg |