1999 - 2003 |
200 Three Series |
Utility tractor |
OCED Tractor Test 1849 | |||
|
OCED Tractor Test 1849 | |
Diesel 8-speed 4WD June 1 - July 1, 1999 Link: OCED Tractor Test 1849 file | |
PTO performance | |
Power at rated engine speed: | 47.6 hp 35.5 kW |
Fuel use: | 2.9 gal/hour 11.0 l/hour |
Power at rated PTO speed: | 42.5 hp 31.7 kW |
Fuel use: | 2.4 gal/hour 9.1 l/hour |
Drawbar performance | |
Max power: | 37.7 hp 28.1 kW |
Fuel use: | 2.9 gal/hour 11.0 l/hour |
Gear 5 used for power test. | |
Max pull: | 4,310 lbs 1955 kg |
Gear 2L used for pull test. |
1999 - 2003 |
200 Three Series |
Utility tractor |
Engine Detail | |
Perkins 903.27 | |
diesel | |
3-cylinder | |
liquid-cooled | |
Displacement: | 165 ci 2.7 L |
Bore/Stroke: | 3.74x5.00 inches 95 x 127 mm |
Power: | 52 hp 38.8 kW |
Compression: | 17.3:1 |
Rated RPM: | 2250 |
Starter volts: | 12 |
Coolant capacity: | 11.2 qts 10.6 L |
1999 - 2003 |
200 Three Series |
Utility tractor |
Transmissions overview | |
8-speed sliding gear | |
8-speed synchro shuttle |
Transmission | |
Type: | sliding gear |
Gears: | 8 forward and 2 reverse |
Clutch: | dry disc |
Four gears (1-4) plus reverse (R) in two ranges (low/high) |
Speeds | |
Transmission | |
Type: | synchro shuttle |
Gears: | 8 forward and reverse |
Clutch: | dry disc |
Four gears (1-4) in two ranges (low/high) with synchronized shuttle shifting. |
Speeds | |
1999 - 2003 |
200 Three Series |
Utility tractor |
Massey Ferguson 243 Tires | |
Ag front: | 6.00-16 |
Ag rear: | 13.6-28 |
Dimensions | |
2WD Wheelbase: | 75.1 inches 190 cm |
4WD Wheelbase: | 76.1 inches 193 cm |
Shiping weight: | 5,045 lbs 2288 kg |
Operating weight: | 5,130 lbs 2326 kg |
Front tread: | 48 to 72 inches 121 to 182 cm (2WD) |
Front tread: | 51.4 to 63.6 inches 130 to 161 cm (4WD) |
Rear tread: | 56 to 84 inches 142 to 213 cm |
1999 - 2003 |
200 Three Series |
Utility tractor |
Attachment overview | |
The model 232 loader was compatible with the Massey Ferguson 243 with two-wheel drive. The model 1032 loader was compatible with four-wheel drive. |
Massey Ferguson 232 Loader | |
Height (to pin): | 106 inches 269 cm |
Clearance, dumped bucket: | 80 inches 203 cm |
Dump reach: | 25 inches 63 cm |
Dump angle: | 42° |
Reach at ground: | 63 inches 160 cm |
Rollback angle: | 13° |
Breakout force (at pin): | 3000 lbs 1360 kg |
Breakout force (at 800mm): | 3400 lbs 1542 kg |
Lift to full height (at 800mm): | 2400 lbs 1088 kg |
Bucket width: | 72 inches 182 cm |
Raise time to height: | 3.5 s |
Bucket dump time: | 1.9 s |
Lowering time: | 2.3 s |
Rollback time: | 1.2 s |
Massey Ferguson 1032 Loader | |
Height (to pin): | 121 inches 307 cm |
Clearance, dumped bucket: | 98 inches 248 cm |
Dump reach: | 20 inches 50 cm |
Dump angle: | 38° |
Reach at ground: | 69 inches 175 cm |
Rollback angle: | 20° |
Breakout force (at 800mm): | 2500 lbs 1134 kg |
Lift to full height (at pin): | 3200 lbs 1451 kg |
Lift to full height (at 800mm): | 2400 lbs 1088 kg |
Bucket width: | 72 inches 182 cm |
Raise time to height: | 5.8 s |
Bucket dump time: | 5.7 s |
Lowering time: | 4.0 s |
Rollback time: | 4.3 s |