2008 - 2016 |
Model year 2008-20122013-2016 |
6D Series |
Utility tractor |
OCED Tractor Test 1949 | |||
|
OCED Tractor Test 1949 | |
Diesel 9-speed 4WD June 15 - 19, 2009 Link: OCED Tractor Test 1949 file | |
PTO performance | |
Max power: | 99.37 hp 74.1 kW |
Fuel use: | 6.3 gal/hour 23.8 l/hour |
Power at rated engine speed: | 99.05 hp 73.9 kW |
Fuel use: | 6.3 gal/hour 23.8 l/hour |
Power at rated PTO speed: | 99.37 hp 74.1 kW |
Fuel use: | 6.3 gal/hour 23.8 l/hour |
Drawbar performance | |
Max power: | 80.89 hp 60.3 kW |
Fuel use: | 6.3 gal/hour 23.8 l/hour |
Max pull: | 9,856 lbs 4470 kg |
2008 - 2016 |
Model year 2008-20122013-2016 |
6D Series |
Utility tractor |
Engine Detail | |
John Deere 4045H PowerTech E | |
intercooled turbocharged diesel | |
4-cylinder 8-valve | |
liquid-cooled | |
Displacement: | 276 ci 4.5 L |
Bore/Stroke: | 4.20x5.00 inches 107 x 127 mm |
Emissions: | Tier 3 |
Rated Power (EC 97/98): | 118.4 hp 88.3 kW |
Fuel system: | Denso electronic high-pressure common rail |
Air cleaner: | two paper elements |
Compression: | 19:1 |
Rated RPM: | 2100 |
Idle RPM: | 900-2200 |
Torque: | 355 lb-ft 481.4 Nm |
Torque RPM: | 1500 |
Firing order: | 1-3-4-2 |
Starter volts: | 12 |
Coolant capacity: | 17.4 qts 16.5 L |
Intake valve clearance: | 0.014 inches 0.356 mm |
Exhaust valve clearance: | 0.018 inches 0.457 mm |
Engine Oil | |
Oil capacity: | 15.85 qts 15.0 L |
Oil change: | 250 h |
500 h (JD TorqGARD oil) |
2008 - 2016 |
Model year 2008-20122013-2016 |
6D Series |
Utility tractor |
Transmissions overview | |
9-speed partially synchronized with power shuttle | |
9-speed partially synchronzied |
Transmission | |
Transmission: | John Deere PowrReverser |
Type: | partially synchronized with power shuttle |
Gears: | 9 forward and reverse |
Clutch: | hydraulic wet disc |
Oil capacity: | 61.2 qts 57.9 L |
Three gears (1-3) in each of three ranges (A-C) plus left-hand reverser. Forward/reverse powershift. Synchronized shift between gears with clutch. Shifts between ranges are unsynchronized: the tractor must be stopped and clutch used to shift range. |
Speeds | |
With 18.4-34 rear tires. | |
Transmission | |
Transmission: | John Deere Top Shaft Syncronized (TSS) |
Type: | partially synchronzied |
Gears: | 9 forward and 3 reverse |
Clutch: | dry disc |
Oil capacity: | 61.2 qts 57.9 L |
Three gears (1-3) plus reverse (R) in each of three ranges (A-C). Shifts between gears, including to reverse, are synchronized using the clutch. Shifts between ranges are not synchronized, the operator must stop the tractor and use the clutch. |
Speeds | |
With 18.4-34 rear tires. | |
2008 - 2016 |
Model year 2008-20122013-2016 |
6D Series |
Utility tractor |
John Deere 6115D Tires | |
Standard tires (ag): | Front: 10.00-16. Rear: 18.4-34 (2WD) |
Front: 13.6-24. Rear: 18.4-34 (4WD) | |
Optional tires (ag): | Front: 10.00-16. Rear: 18.4-38 (2WD) |
Dimensions | |
Wheelbase: | 92.5 inches 234 cm |
2WD Length: | 168.5 inches 427 cm |
4WD Length: | 166 inches 421 cm |
Width: | 72 inches 182 cm |
Height (cab): | 107.5 inches 273 cm |
Height (exhaust): | 106 inches 269 cm |
2WD Clearance (front axle): | 23.5 inches 59 cm |
4WD Clearance (front axle): | 18 inches 45 cm |
Rear axle: | 72 inch length 1828 mm ( |
Front tread: | 60.4 to 80.4 inches 153 to 204 cm (2WD) |
Front tread: | 59.7 to 79.4 inches 151 to 201 cm (4WD) |
Rear tread: | 59.5/63.5/67.6/71.3/75.4/79.4 inches 151/161/171/181/191/201 cm |
John Deere 6115D Weight | |
7,495 lbs 3399 kg (2WD ROPS) | |
8,160 lbs 3701 kg (2WD cab) | |
8,730 lbs 3959 kg (4WD ROPS) | |
9,390 lbs 4259 kg (4WD cab) | |
Operating: | 9,160 lbs 4154 kg (4WD ROPS) |
Ballasted: | 12,345 lbs 5599 kg |
2008 - 2016 |
Model year 2008-20122013-2016 |
6D Series |
Utility tractor |
John Deere 563 Loader | |
Height (to pin): | 133.8 inches 339 cm |
Clearance, dumped bucket: | 93.2 inches 236 cm |
Dump reach: | 36.4 inches 92 cm |
Dump angle: | 71° |
Reach at ground: | 87.6 inches 222 cm |
Rollback angle: | 41° |
Breakout force (at pin): | 6,632 lbs 3008 kg |
5,665 lbs 2569 kg (MSL) | |
Breakout force (at 800mm): | 4,698 lbs 2131 kg |
4,743 lbs 2151 kg (MSL) | |
Breakout force (bucket): | 4,900 lbs 2222 kg |
4,766 lbs 2161 kg (MSL) | |
Lift to full height (at pin): | 4,063 lbs 1842 kg |
3,168 lbs 1437 kg (MSL) | |
Lift to full height (at 800mm): | 2,773 lbs 1257 kg |
3,311 lbs 1501 kg (MSL) | |
Lift to 1.5m (at pin): | 5,154 lbs 2337 kg |
4,281 lbs 1941 kg (MSL) | |
Lift to 1.5m (at 800mm): | 3,880 lbs 1759 kg |
4,021 lbs 1823 kg (MSL) | |
Bucket width: | 73 inches 185 cm |
Raise time to height: | 5.6 s |
4.8 s (MSL) | |
Bucket dump time: | 5.1 s |
4 s (MSL) | |
Lowering time: | 4.8 s |
4.1 s (MSL) | |
Rollback time: | 5.4 s |
4.1 s (MSL) |
John Deere 673 Loader | |
Height (to pin): | 140 inches 355 cm |
Clearance, dumped bucket: | 99 inches 251 cm |
Dump reach: | 43 inches 109 cm |
Dump angle: | 75° |
Reach at ground: | 97.1 inches 246 cm |
Rollback angle: | 47° |
Breakout force (at pin): | 7,284 lbs 3304 kg |
6,217 lbs 2820 kg (MSL) | |
Breakout force (at 800mm): | 5,328 lbs 2416 kg |
5,440 lbs 2467 kg (MSL) | |
Breakout force (bucket): | 5,823 lbs 2641 kg |
6,474 lbs 2936 kg (MSL) | |
Lift to full height (at pin): | 3,964 lbs 1798 kg |
3,594 lbs 1630 kg (MSL) | |
Lift to full height (at 800mm): | 2,782 lbs 1261 kg |
3,790 lbs 1719 kg (MSL) | |
Lift to 1.5m (at pin): | 5,536 lbs 2511 kg |
4,861 lbs 2204 kg (MSL) | |
Lift to 1.5m (at 800mm): | 4,246 lbs 1925 kg |
4,641 lbs 2105 kg (MSL) | |
Bucket width: | 85 inches 215 cm |
Raise time to height: | 6.6 s |
6 s (MSL) | |
Bucket dump time: | 5.6 s |
5.1 s (MSL) | |
Lowering time: | 5.8 s |
5.2 s (MSL) | |
Rollback time: | 6.0 s |
5.4 s (MSL) |