2008 - ???? |
High-Clearance tractor |
Production | |
Manufacturer: | John Deere |
Type: | High-Clearance tractor |
Factory: | Augusta, Georgia, USA |
Original price: | $51,710 (2010 - ROPS) |
John Deere 5095MH Power | |
Engine (gross): | 95 hp 70.8 kW |
PTO (claimed): | 80 hp 59.7 kW |
John Deere 5095MH Engine | |
John Deere 4.5L 4-cyl diesel | |
Engine details ... |
Mechanical | |
Chassis: | 4x4 MFWD 4WD |
Steering: | hydrostatic power |
Brakes: | hydraulic wet disc |
Cab: | Foldable ROPS. Optional cab with heat and air conditioning. |
Transmissions: | 16-speed partially synchronized |
12-speed partially synchronized | |
16-speed partially synchronized with power shuttle | |
32-speed | |
Transmission details ... |
Capacity | |
Fuel: | 30.3 gal 114.7 L (ROPS) |
40.7 gal 154.0 L (cab) | |
Hydraulic system: | 11.9 gal 45.0 L |
Hydraulics | |||||||
Capacity: | 11.9 gal 45.0 L | ||||||
Pressure: | 2828 psi 195.0 bar | ||||||
Rear valves: | 0 to 3 | ||||||
Mid valves: | 0 to 3 | ||||||
Pump flow: | 18.4 gpm 69.6 lpm | ||||||
Total flow: | 24.7 gpm 93.5 lpm | ||||||
Oil type: |
| ||||||
Steering flow: | 6.3 gpm 23.8 lpm | ||||||
Steering press.: | 1900 psi 131.0 bar |
-10oF [-23oC]↑ | : HY-GARD |
-10oF [-23oC]↑ | : JDM J20C |
10o↔104oF [-12o↔40oC] | : BIO HY-GARD JDM 20D |
Tractor hitch | |
Rear Type: | independent electrohyraulic |
Rear lift (at 24"/610mm): | 3,595 lbs 1630 kg |
4,498 lbs 2040 kg (optional) |
Power Take-off (PTO) | |
Rear PTO: | independent electrochydraulic |
Rear RPM: | 540/540E |
540/540E/1000 (optional) |
Dimensions & Tires | |
Wheelbase: | 85.6 inches 217 cm |
Weight: | 7100 to 7800 pounds |
Front tire: | 230/95R40 |
Rear tire: | 230/95R40 |
Full dimensions and tires ... |
5095MH Serial Numbers | |
Location: | Tractor frame on front left side. |
Electrical | |
Ground: | negative |
Charging system: | alternator |
Charging amps: | 70 (ROPS) |
90 (cab) | |
120 (optional) | |
Battery CCA: | 925 |
Battery volts: | 12 |
Battery Group: | 31 |
2008 - 2011 |
5M Series |
Utility tractor |
Nebraska Tractor Test 1961 | |||
|
Nebraska Tractor Test 1961 | |
Diesel 16-speed 4WD October 5 - 13, 2009 Link: Nebraska Tractor Test 1961 file | |
PTO performance | |
Max power: | 84.42 hp 63.0 kW |
Fuel use: | 5.0 gal/hour 18.9 l/hour |
Power at rated engine speed: | 80.34 hp 59.9 kW |
Fuel use: | 5.2 gal/hour 19.7 l/hour |
Power at rated PTO speed: | 83.03 hp 61.9 kW |
Fuel use: | 5.1 gal/hour 19.3 l/hour |
2008 - 2011 |
5M Series |
Utility tractor |
Engine Detail | |
John Deere PowerTech M 4045 | |
turbocharged diesel | |
4-cylinder | |
liquid-cooled | |
Displacement: | 276 ci 4.5 L |
Bore/Stroke: | 4.19x5.00 inches 106 x 127 mm |
Emissions: | Tier 3 |
Rated Power (EC 97/98): | 95 hp 70.8 kW |
Air cleaner: | dry |
Rated RPM: | 2200 |
Torque: | 372 lb-ft 504.4 Nm |
Torque RPM: | 1600 |
Starter volts: | 12 |
Coolant capacity: | 12 qts 11.4 L |
Engine Oil | |
Oil capacity: | 8.8 qts 8.3 L |
2008 - 2011 |
5M Series |
Utility tractor |
Transmissions overview | |
16-speed partially synchronized | |
12-speed partially synchronized | |
16-speed partially synchronized with power shuttle | |
32-speed |
Transmission | |
Transmission: | SyncReverser |
Type: | partially synchronized |
Gears: | 16 forward and reverse |
Operated via three levers and foot clutch. The speed shift lever selects one of four speeds. The range shift lever selects one of four ranges. Reverser lever selects direction of travel. Synchronized shuttle shift with reverser lever, or speed change with speed shift lever, while moving using the clutch. Tractor must be stopped to change ranges. |
Speeds | |
With 16.9-30 rear tires. | |
Transmission | |
Transmission: | SyncShuttle Plus |
Type: | partially synchronized |
Gears: | 12 forward and 4 reverse |
Operated via two levers and foot clutch. Speed shift lever selects three forward gears or reverse. Range shift lever selects one of four ranges. Synchronized shuttle shift or speed change shift while moving using the clutch. Tractor must be stopped to change range. |
Speeds | |
With 16.9-30 rear tires. | |
Transmission | |
Transmission: | PowrReverser |
Type: | partially synchronized with power shuttle |
Gears: | 16 forward and reverse |
Operated via three levers and foot clutch. The speed shift lever selects one of four speeds. The range shift lever selects one of four ranges. Reverser lever selects direction of travel. Clutchless power shift between forward and reverse using reverser lever. Synchronized speed change while moving using the speed shift lever with the clutch. Tractor must be stopped to change ranges. |
Speeds | |
With 16.9-30 rear tires. | |
Transmission | |
Transmission: | PowrReverser Plus |
Gears: | 32 forward and 16 reverse |
Operated via three levers and foot clutch plus push button. The speed shift lever selects one of four speeds plus a push-button high or low selection. The range shift lever selects one of four ranges. Reverser lever selects direction of travel. Clutchless power shift between forward and reverse using reverser lever. Synchronized speed change while moving using the speed shift lever with the clutch. Tractor must be stopped to change ranges. |
-10oF [-23oC]↑ | : HY-GARD |
-10oF [-23oC]↑ | : JDM J20C |
10o↔104oF [-12o↔40oC] | : BIO HY-GARD JDM 20D |
2008 - 2011 |
5M Series |
Utility tractor |
John Deere 5095M Tires | |
Ag front: | 11L-15 (2WD) |
12.4R24 (4WD) | |
Ag rear: | 480/80R30 |
Ag front: | 7.50-16 (2WD) |
9.5-24 (4WD) | |
11.2-24 (4WD) | |
11.2R24 (4WD) | |
13.6R24 (4WD) | |
230/95R32 (4WD) | |
Ag rear: | 14.9-28 |
16.9-28 | |
16.9-30 | |
420/90R30 | |
15.5R38 | |
16.9R34 (4WD) | |
230/95R48 (4WD) | |
Lawn/turf front: | 27/12LL-15 (2WD) |
12LL-16 (4WD) | |
44x18-20 (4WD) | |
Lawn/turf rear: | 22.5LL-16.1 |
23.1-26 | |
Industrial front: | 11LL-15 (2WD) |
12.5/80-18 (4WD) | |
Industrial rear: | 19.5-24 |
19.5L-24 | |
16.9-24 |
Dimensions | |
Wheelbase: | 85.6 inches 217 cm |
4WD Clearance (front axle): | 17.9 inches 45 cm |
2WD Clearance (front axle): | 18.8 inches 47 cm |
2WD Front tread: | 58.6 to 78.3 inches 148 to 198 cm |
4WD Front tread: | 52.8 to 77 inches 134 to 195 cm |
Rear tread: | 59.6 to 71.4 inches 151 to 181 cm |
John Deere 5095M Weight | |
Operating: | 6,591 lbs 2989 kg (2WD ROPS) |
7,000 lbs 3175 kg (2WD deluxe ROPS) | |
7,750 lbs 3515 kg (4WD cab) | |
7,000 lbs 3175 kg (4WD ROPS) | |
7,400 lbs 3356 kg (4WD deluxe ROPS) | |
8,150 lbs 3696 kg (4WD cab) |
2008 - 2011 |
5M Series |
Utility tractor |
John Deere 553 Loader | |
Height (to pin): | 123 inches 312 cm |
Clearance, dumped bucket: | 95 inches 241 cm |
Dump reach: | 40 inches 101 cm |
Dump angle: | 43° |
Reach at ground: | 71 inches 180 cm |
Rollback angle: | 31° |
Breakout force (at pin): | 5,537 lbs 2511 kg |
Lift to full height (at pin): | 2,917 lbs 1323 kg |
John Deere 563 Loader | |
Height (to pin): | 133 inches 337 cm |
Clearance, dumped bucket: | 97 inches 246 cm |
Dump reach: | 50 inches 127 cm |
Dump angle: | 72° |
Reach at ground: | 88 inches 223 cm |
Rollback angle: | 44° |
Breakout force (at pin): | 6,654 lbs 3018 kg |
MSL Breakout force (at pin): | 5,665 lbs 2569 kg |
Lift to full height (at pin): | 3,982 lbs 1806 kg |
MSL Lift to full height (at pin): | 3,121 lbs 1415 kg |