1988 - 1992 |
4055 Series |
Row-Crop tractor |
OCED Tractor Test 1619 | |||
|
OCED Tractor Test 1619 | |
Diesel Powershift 4WD April 1, 1989 - May 1, 1979 Link: OCED Tractor Test 1619 file | |
PTO performance | |
Max power: | 146.86 hp 109.5 kW |
Fuel use: | 8.1 gal/hour 30.7 l/hour |
Power at rated engine speed: | 141.60 hp 105.6 kW |
Fuel use: | 8.4 gal/hour 31.8 l/hour |
Drawbar performance | |
Max power: | 122.53 hp 91.4 kW |
Fuel use: | 8.4 gal/hour 31.8 l/hour |
Gear 12 used for power test. | |
Max pull: | 17,446 lbs 7913 kg |
Gear 3 used for pull test. |
OCED Tractor Test 1628 | |||
|
OCED Tractor Test 1628 | |
Diesel Quad-Range 2WD September 1 - October 1, 1989 Link: OCED Tractor Test 1628 file | |
PTO performance | |
Max power: | 148.14 hp 110.5 kW |
Fuel use: | 8.2 gal/hour 31.0 l/hour |
Power at rated engine speed: | 142.69 hp 106.4 kW |
Fuel use: | 8.4 gal/hour 31.8 l/hour |
Drawbar performance | |
Max power: | 128.59 hp 95.9 kW |
Max pull: | 17,161 lbs 7784 kg |
1988 - 1992 |
4055 Series |
Row-Crop tractor |
Engine Detail | |
John Deere | |
turbocharged diesel | |
6-cylinder | |
liquid-cooled inline | |
Displacement: | 466 ci 7.6 L |
Bore/Stroke: | 4.5625x4.75 inches 116 x 121 mm |
Fuel system: | direct injection |
Air cleaner: | dual paper elements |
Compression: | 16:1 |
Rated RPM: | 2200 |
Idle RPM: | 800-2400 |
Operating RPM: | 1500-2200 |
Firing order: | 1-5-3-6-2-4 |
Starter volts: | 12 |
Coolant capacity: | 27 qts 25.6 L |
Intake valve clearance: | 0.020 inches 0.508 mm |
Exhaust valve clearance: | 0.020 inches 0.508 mm |
Engine Oil | |
Oil capacity: | 19 qts 18.0 L |
1988 - 1992 |
4055 Series |
Row-Crop tractor |
Transmissions overview | |
16-speed partial power shift | |
15-speed full power shift |
Transmission | |
Transmission: | John Deere Quad Range |
Type: | partial power shift |
Gears: | 16 forward and 6 reverse |
Clutch: | hydraulic wet disc |
2WD Oil capacity: | 64 qts 60.6 L |
4WD Oil capacity: | 68.8 qts 65.1 L |
Four gears (1-4) in four ranges (A-D) with high-low power shift. |
Speeds | |
With 18.4-38 rear tires. | |
Transmission | |
Transmission: | John Deere Power Shift |
Type: | full power shift |
Gears: | 15 forward and 4 reverse |
Clutch: | hydraulic wet disc |
2WD Oil capacity: | 53.9 qts 51.0 L |
4WD Oil capacity: | 63.4 qts 60.0 L |
Speeds | |
1988 - 1992 |
4055 Series |
Row-Crop tractor |
John Deere 4455 Tires | |
2WD Standard tires (ag): | Front: 10.00-16. Rear: 18.4-38 |
4WD Standard tires (ag): | Front: 14.9-26. Rear: 18.4-38 |
Dimensions | |
2WD Wheelbase: | 106.7 inches 271 cm |
4WD Wheelbase: | 105.3 inches 267 cm |
Length: | 158.6 inches 402 cm |
Width: | 109 inches 276 cm *Minimum width with standard axle. |
Height (steering wheel): | 92.8 inches 235 cm |
Height (cab): | 116.5 inches 295 cm |
Shipping weight: | 14,145 lbs 6416 kg |
Operating weight: | 15,275 lbs 6928 kg (4WD Powershift) |
Rear axle: | Rack-and-pinion: 3.625 by 109 inches 92 by 2768 mm |
Rear axle: | Rack-and-pinion: 3.625 by 119 inches 92 by 3022 mm |
Front tread: | 60.5 to 88 inches 153 to 223 cm |
Rear tread: | 62 to 116 inches 157 to 294 cm |
1988 - 1992 |
4055 Series |
Row-Crop tractor |
John Deere 158 Loader | |
For use on tractors with two-wheel drive. | |
Loader weight: | 1771 lbs 803 kg |
Height (to pin): | 156 inches 396 cm |
Clearance, dumped bucket: | 127 inches 322 cm |
Dump reach: | 28 inches 71 cm |
Clearance, level bucket: | 149 inches 378 cm |
Rollback angle: | 14° |
Breakout force (lift): | 5300 lbs 2404 kg |
Lift to full height (at pin): | 4160 lbs 1886 kg |
Bucket capacity: | 0.5 cu yd 0.4 cu m |
0.6 cu yd 0.5 cu m | |
0.8 cu yd 0.6 cu m | |
0.9 cu yd 0.7 cu m | |
Bucket width: | 60 inches 152 cm |
72 inches 182 cm | |
84 inches 213 cm | |
96 inches 243 cm |
John Deere 265 Loader | |
For use on tractors with two-wheel drive. | |
Loader weight: | 2619 lbs 1187 kg |
Height (to pin): | 157 inches 398 cm |
Clearance, dumped bucket: | 123 inches 312 cm |
Dump reach: | 25.6 inches 65 cm |
Clearance, level bucket: | 150 inches 381 cm |
Rollback angle: | 43° |
Breakout force (lift): | 5730 lbs 2599 kg |
Lift to full height (at pin): | 3920 lbs 1778 kg |
Bucket width: | 61 inches 154 cm |
73 inches 185 cm | |
85 inches 215 cm | |
97 inches 246 cm |
John Deere 280 Loader | |
For use on tractors with four-wheel drive. | |
Loader weight: | 2795 lbs 1267 kg |
Height (to pin): | 178 inches 452 cm |
Clearance, dumped bucket: | 152 inches 386 cm |
Dump reach: | 26 inches 66 cm |
Clearance, level bucket: | 173 inches 439 cm |
Rollback angle: | 41° |
Breakout force (lift): | 6220 lbs 2821 kg |
Lift to full height (at pin): | 4580 lbs 2077 kg |
Bucket width: | 85 inches 215 cm |
97 inches 246 cm |
John Deere 840 Loader | |
Clearance, dumped bucket: | 149 inches 378 cm |
Dump angle: | 60° |
Rollback angle: | 40° |
Bucket width: | 96.5 inches 245 cm |