1988 - 1992 |
4055 Series |
Row-Crop tractor |
Production | |
Manufacturer: | John Deere |
Type: | Row-Crop tractor |
Factories: | Waterloo, Iowa, USA |
Saltillo, Mexico |
Variants | |
4255: | row-crop |
4255 Hi-Crop: | high-clearance |
John Deere 4255 Power | |
Engine (net): | 142.2 hp 106.0 kW |
PTO (claimed): | 120 hp 89.5 kW |
Drawbar (tested): | 112.26 hp 83.7 kW |
PTO (tested): | 127.91 hp 95.4 kW |
power test details ... |
John Deere 4255 Engine | |
John Deere 7.6L 6-cyl diesel | |
Engine details ... |
Mechanical | |
Chassis: | 4x2 2WD |
4x4 MFWD 4WD | |
Final drives: | inboard planetary |
Steering: | power |
Brakes: | differential hydraulic wet discs |
Cab: | Cab standard. |
Transmissions: | 16-speed partial power shift |
15-speed full power shift | |
Transmission details ... |
Capacity | |
Fuel: | 65 gal 246.0 L |
Hydraulic system: | 13.5 gal 51.1 L (Powershift 2WD) |
15.9 gal 60.2 L (Powershift 4WD) | |
16 gal 60.6 L (Quad-Range 2WD) | |
17.2 gal 65.1 L (Quad-Range 4WD) |
Hydraulics | |
Type: | closed center |
Capacity: | 13.5 gal 51.1 L (Powershift 2WD) |
15.9 gal 60.2 L (Powershift 4WD) | |
16 gal 60.6 L (Quad-Range 2WD) | |
17.2 gal 65.1 L (Quad-Range 4WD) | |
Pressure: | 2530 psi 174.4 bar |
Valves: | 2 or 3 |
Pump flow: | 26.5 gpm 100.3 lpm |
SCV flow: | 20.6 gpm 78.0 lpm |
Tractor hitch | |
Rear Type: | II |
Rear lift: | 6175 lbs 2800 kg *Advertised as 6550 pounds, the tractor was only able to lift 6175 during testing. |
8077 lbs 3663 kg *With optional assist cylinder. Advertised as 8470 pounds, but actual tested lift was 8077 pounds. |
Power Take-off (PTO) | |
Rear PTO: | independent |
Clutch: | hydraulic |
Rear RPM: | 540/1000 (1.375) |
Dimensions & Tires | |
2WD Wheelbase: | 106.7 inches 271 cm |
4WD Wheelbase: | 105.3 inches 267 cm |
Weight: | 12225 to 14050 pounds |
Front tire: | 10.00-16 |
2WD Rear tire: | 18.4-38 |
Full dimensions and tires ... |
John Deere 4255 attachments | |
front-end loader | |
Attachment details ... |
4255 Serial Numbers | |
Location: | Serial number plate on the rear of the 4255, above the PTO shaft. |
photo of 4255 serial number | |
1989: | 1001 |
1990: | 3001 |
1991: | 5501 |
1992: | 10001 |
how to read serial numbers... |
Electrical | |
Ground: | negative |
Charging system: | alternator |
Charging amps: | 120 |
Batteries: | 2 |
Battery CCA: | 925 |
Battery volts: | 12 |
1988 - 1992 |
4055 Series |
Row-Crop tractor |
OCED Tractor Test 1618 | |||
|
OCED Tractor Test 1618 | |
Diesel Powershift 4WD April 1 - May 1, 1989 Link: OCED Tractor Test 1618 file | |
PTO performance | |
Max power: | 126.68 hp 94.5 kW |
Fuel use: | 7.2 gal/hour 27.3 l/hour |
Power at rated engine speed: | 123.36 hp 92.0 kW |
Fuel use: | 7.3 gal/hour 27.6 l/hour |
Drawbar performance | |
Max power: | 104.28 hp 77.8 kW |
Fuel use: | 7.3 gal/hour 27.6 l/hour |
Gear 7 used for power test. | |
Max pull: | 15,833 lbs 7181 kg |
Gear 3 used for pull test. |
OCED Tractor Test 1627 | |||
|
OCED Tractor Test 1627 | |
Diesel Quad-Range 2WD September 1 - 30, 1989 Link: OCED Tractor Test 1627 file | |
PTO performance | |
Max power: | 127.91 hp 95.4 kW |
Fuel use: | 7.2 gal/hour 27.3 l/hour |
Power at rated engine speed: | 123.69 hp 92.2 kW |
Fuel use: | 7.5 gal/hour 28.4 l/hour |
Drawbar performance | |
Max power: | 112.26 hp 83.7 kW |
Fuel use: | 7.5 gal/hour 28.4 l/hour |
Max pull: | 14,635 lbs 6638 kg |
1988 - 1992 |
4055 Series |
Row-Crop tractor |
Engine Detail | |
John Deere | |
turbocharged diesel | |
6-cylinder | |
liquid-cooled inline | |
Displacement: | 466 ci 7.6 L |
Bore/Stroke: | 4.5625x4.75 inches 116 x 121 mm |
Fuel system: | direct injection |
Air cleaner: | dual paper elements |
Compression: | 16:1 |
Rated RPM: | 2200 |
Idle RPM: | 800-2400 |
Operating RPM: | 1500-2200 |
Firing order: | 1-5-3-6-2-4 |
Starter volts: | 12 |
Coolant capacity: | 27 qts 25.6 L |
Intake valve clearance: | 0.020 inches 0.508 mm |
Exhaust valve clearance: | 0.020 inches 0.508 mm |
Engine Oil | |
Oil capacity: | 19 qts 18.0 L |
1988 - 1992 |
4055 Series |
Row-Crop tractor |
Transmissions overview | |
16-speed partial power shift | |
15-speed full power shift |
Transmission | |
Transmission: | John Deere Quad Range |
Type: | partial power shift |
Gears: | 16 forward and 6 reverse |
Clutch: | hydraulic wet disc |
2WD Oil capacity: | 64 qts 60.6 L |
4WD Oil capacity: | 68.8 qts 65.1 L |
Four gears (1-4) in four ranges (A-D) with high-low power shift. |
Speeds | |
With 18.4-38 rear tires. | |
Transmission | |
Transmission: | John Deere Power Shift |
Type: | full power shift |
Gears: | 15 forward and 4 reverse |
Clutch: | hydraulic wet disc |
2WD Oil capacity: | 53.9 qts 51.0 L |
4WD Oil capacity: | 63.4 qts 60.0 L |
Speeds | |
1988 - 1992 |
4055 Series |
Row-Crop tractor |
John Deere 4255 Tires | |
2WD Standard tires (ag): | Front: 10.00-16. Rear: 18.4-38 |
4WD Standard tires (ag): | Front: 14.9-26. Rear: 18.4-38 |
Dimensions | |
2WD Wheelbase: | 106.7 inches 271 cm |
4WD Wheelbase: | 105.3 inches 267 cm |
Length: | 158.6 inches 402 cm |
Width: | 96 inches 243 cm *Minimum width with standard axle. |
Height (steering wheel): | 92.8 inches 235 cm |
Height (cab): | 116.5 inches 295 cm |
Rear axle: | Rack-and-pinion: 3.375 by 96 inches 85 by 2438 mm |
Rear axle: | Rack-and-pinion: 3.375 by 113 inches 85 by 2870 mm |
John Deere 4255 Weight | |
Operating: | 12,225 lbs 5545 kg (2WD Quad-Range) |
14,050 lbs 6373 kg (4WD Powershift) | |
Ballasted: | 15,570 lbs 7062 kg |
1988 - 1992 |
4055 Series |
Row-Crop tractor |
John Deere 265 Loader | |
Loader weight: | 2619 lbs 1187 kg |
Height (to pin): | 157 inches 398 cm |
Clearance, dumped bucket: | 123 inches 312 cm |
Dump reach: | 25.6 inches 65 cm |
Clearance, level bucket: | 150 inches 381 cm |
Rollback angle: | 43° |
Breakout force (lift): | 5730 lbs 2599 kg |
Lift to full height (at pin): | 3920 lbs 1778 kg |
Bucket width: | 61 inches 154 cm |
73 inches 185 cm | |
85 inches 215 cm | |
97 inches 246 cm |
John Deere 280 Loader | |
For use on tractors with four-wheel drive. | |
Loader weight: | 2795 lbs 1267 kg |
Height (to pin): | 178 inches 452 cm |
Clearance, dumped bucket: | 152 inches 386 cm |
Dump reach: | 26 inches 66 cm |
Clearance, level bucket: | 173 inches 439 cm |
Rollback angle: | 41° |
Breakout force (lift): | 6220 lbs 2821 kg |
Lift to full height (at pin): | 4580 lbs 2077 kg |
Bucket width: | 85 inches 215 cm |
97 inches 246 cm |
John Deere 840 Loader | |
Clearance, dumped bucket: | 149 inches 378 cm |
Dump angle: | 60° |
Rollback angle: | 40° |
Bucket width: | 96.5 inches 245 cm |