1963 - 1972 |
New Generation Series |
Row-Crop tractor |
Production | |
Manufacturer: | John Deere |
Type: | Row-Crop tractor |
Factories: | Waterloo, Iowa, USA |
Mexico | |
Total built: | 184,879 (total) |
8,123 (gas) | |
8,445 (LP) | |
168,311 (diesel) | |
17,732 (standard) | |
Original price: | $10,345 (1972 ) |
Variants | |
4020: | row-crop |
4020S: | standard |
4020HC: | high-crop |
600: | industrial |
John Deere 4020 Power | |
Drawbar (tested): | 83.79 hp 62.5 kW |
PTO (tested): | 95.83 hp 71.5 kW |
power test details ... |
John Deere 4020 Engines | |
John Deere 6.6L 6-cyl diesel | |
John Deere 5.6L 6-cyl gasoline | |
John Deere 5.9L 6-cyl gasoline | |
John Deere 5.9L 6-cyl LP gas | |
Engine details ... |
Mechanical | |
Chassis: | 4x2 2WD |
4x4 HFWD 4WD*Front-wheel assist was optional after 1969. | |
Differential lock: | mechanical rear*Optional |
Steering: | power |
Brakes: | hydraulic wet disc |
Cab: | Open operator station. Cab optional. |
Transmissions: | 8-speed partially synchronized |
8-speed full power shift | |
Transmission details ... |
Capacity | |
Gasoline Fuel: | 34 gal 128.7 L |
Diesel Fuel: | 34 gal 128.7 L |
LP-gas Fuel: | 45 gal 170.3 L |
Syncro-Range Hydraulic system: | 10 gal 37.9 L |
Power Shift Hydraulic system: | 12 gal 45.4 L |
Hydraulics | |
Type: | closed center |
Syncro-Range Capacity: | 10 gal 37.9 L |
Power Shift Capacity: | 12 gal 45.4 L |
Pressure: | 2250 psi 155.1 bar |
Valves: | 1 |
SCV flow: | 6 gpm 22.7 lpm |
Total flow: | 18 gpm 68.1 lpm (early) |
Tractor hitch | |
Rear Type: | II |
Rear lift: | 3790 lbs 1719 kg |
Power Take-off (PTO) | |
Rear PTO: | independent |
Rear RPM: | 540/1000 |
1000 | |
Engine RPM: | 540@1900 1000@1900 |
Front PTO: | independent |
Front RPM: | 1000 |
Engine RPM: | 1000@1900 |
Dimensions & Tires | |
Row crop Wheelbase: | 97.5 inches 247 cm |
Standard Wheelbase: | 100.25 inches 254 cm |
Weight: | 8225 to 9560 pounds |
Front tire: | 6.00-16 |
Rear tire: | 15.5-38 |
Full dimensions and tires ... |
John Deere 4020 attachments | |
front-end loader | |
Attachment details ... |
4020 Serial Numbers | |
Location: | Serial number plate on the rear of the 4020 transmission case. |
photo of 4020 serial number | |
1964: | 65000 |
1965: | 91000 |
1966: | 119000 |
1967: | 145660 |
1968: | 173982 |
1969: | 201000 |
1970: | 222160 |
1971: | 250000 |
1972: | 260791 |
Final: | 270288 |
how to read serial numbers... |
Electrical | |
Ground: | positive (1964-1969) |
negative (1969-1972) | |
floating (24V) | |
Charging system: | Motorola alternator |
Charging amps: | 55 |
Batteries: | 2 (24V system) |
1 (12V system) | |
Battery volts: | 12 |
Battery AH: | 75 |
1963 - 1972 |
New Generation Series |
Row-Crop tractor |
Nebraska Tractor Test 849 | |||
|
Nebraska Tractor Test 849 | |
Diesel Syncro-Range 2WD September 23 - October 2, 1963 Link: Nebraska Tractor Test 849 file | |
PTO performance | |
Power at rated engine speed: | 91.17 hp 68.0 kW |
Fuel use: | 6.4 gal/hour 24.2 l/hour |
Power at rated PTO speed: | 83.57 hp 62.3 kW |
Fuel use: | 5.6 gal/hour 21.2 l/hour |
Drawbar performance | |
Max power: | 76.36 hp 56.9 kW |
Fuel use: | 6.4 gal/hour 24.2 l/hour |
Gear 4 used for power test. | |
Max pull: | 10,184 lbs 4619 kg |
Gear 2 used for pull test. |
Nebraska Tractor Test 850 | |||
|
Nebraska Tractor Test 850 | |
Gasoline Syncro-Range 2WD September 30 - October 7, 1963 Link: Nebraska Tractor Test 850 file | |
PTO performance | |
Power at rated engine speed: | 88.09 hp 65.7 kW |
Fuel use: | 8.4 gal/hour 31.8 l/hour |
Power at rated PTO speed: | 79.95 hp 59.6 kW |
Fuel use: | 7.3 gal/hour 27.6 l/hour |
Drawbar performance | |
Max power: | 73.06 hp 54.5 kW |
Fuel use: | 8.2 gal/hour 31.0 l/hour |
Gear 4 used for power test. | |
Max pull: | 10,088 lbs 4575 kg |
Gear 2 used for pull test. |
Nebraska Tractor Test 853 | |||
|
Nebraska Tractor Test 853 | |
LP gas Syncro-Range 2WD October 5 - 11, 1963 Link: Nebraska Tractor Test 853 file | |
PTO performance | |
Power at rated engine speed: | 90.48 hp 67.5 kW |
Fuel use: | 10.1 gal/hour 38.2 l/hour |
Power at rated PTO speed: | 81.14 hp 60.5 kW |
Fuel use: | 8.8 gal/hour 33.3 l/hour |
Drawbar performance | |
Max power: | 75.19 hp 56.1 kW |
Fuel use: | 9.7 gal/hour 36.7 l/hour |
Gear 4 used for power test. | |
Max pull: | 10,217 lbs 4634 kg |
Gear 2 used for pull test. |
Nebraska Tractor Test 930 | |||
|
Nebraska Tractor Test 930 | |
Diesel Syncro-Range 2WD November 16 - 20, 1965 Link: Nebraska Tractor Test 930 file | |
PTO performance | |
Power at rated engine speed: | 94.88 hp 70.8 kW |
Fuel use: | 6.0 gal/hour 22.7 l/hour |
Power at rated PTO speed: | 86.85 hp 64.8 kW |
Fuel use: | 5.3 gal/hour 20.1 l/hour |
Drawbar performance | |
Max power: | 83.79 hp 62.5 kW |
Fuel use: | 6.0 gal/hour 22.7 l/hour |
Gear 4 used for power test. | |
Max pull: | 11,249 lbs 5102 kg |
Gear 2 used for pull test. |
Nebraska Tractor Test 934 | |||
|
Nebraska Tractor Test 934 | |
LP gas Syncro-Range 2WD April 26 - May 2, 1966 Link: Nebraska Tractor Test 934 file | |
PTO performance | |
Power at rated engine speed: | 94.67 hp 70.6 kW |
Fuel use: | 10.2 gal/hour 38.6 l/hour |
Power at rated PTO speed: | 84.22 hp 62.8 kW |
Fuel use: | 8.9 gal/hour 33.7 l/hour |
Drawbar performance | |
Max power: | 83.59 hp 62.3 kW |
Fuel use: | 10.2 gal/hour 38.6 l/hour |
Gear 4 used for power test. | |
Max pull: | 10,674 lbs 4841 kg |
Gear 2 used for pull test. |
Nebraska Tractor Test 939 | |||
|
Nebraska Tractor Test 939 | |
340ci gasoline Syncro-Range 2WD May 17 - 24, 1966 Link: Nebraska Tractor Test 939 file | |
PTO performance | |
Power at rated engine speed: | 95.56 hp 71.3 kW |
Fuel use: | 7.9 gal/hour 29.9 l/hour |
Power at rated PTO speed: | 85.81 hp 64.0 kW |
Fuel use: | 6.9 gal/hour 26.1 l/hour |
Drawbar performance | |
Max power: | 83.28 hp 62.1 kW |
Fuel use: | 7.7 gal/hour 29.1 l/hour |
Gear 4 used for power test. | |
Max pull: | 10,658 lbs 4834 kg |
Gear 2 used for pull test. |
Nebraska Tractor Test 1012 | |||
|
Nebraska Tractor Test 1012 | |
362ci gasoline Power Shift 2WD May 13 - June 4, 1969 Link: Nebraska Tractor Test 1012 file | |
PTO performance | |
Power at rated engine speed: | 95.66 hp 71.3 kW |
Fuel use: | 9.3 gal/hour 35.2 l/hour |
Power at rated PTO speed: | 87.52 hp 65.3 kW |
Fuel use: | 8.1 gal/hour 30.7 l/hour |
Drawbar performance | |
Max power: | 82.57 hp 61.6 kW |
Fuel use: | 9.3 gal/hour 35.2 l/hour |
Nebraska Tractor Test 1024 | |||
|
Nebraska Tractor Test 1024 | |
Diesel Power Shift 2WD September 30 - October 17, 1969 Link: Nebraska Tractor Test 1024 file | |
PTO performance | |
Power at rated engine speed: | 95.83 hp 71.5 kW |
Fuel use: | 6.5 gal/hour 24.6 l/hour |
Power at rated PTO speed: | 89.93 hp 67.1 kW |
Fuel use: | 6.0 gal/hour 22.7 l/hour |
Drawbar performance | |
Max power: | 83.09 hp 62.0 kW |
Fuel use: | 6.6 gal/hour 25.0 l/hour |
1963 - 1972 |
New Generation Series |
Row-Crop tractor |
Engines overview | |
John Deere 6.6L 6-cyl diesel | |
John Deere 5.6L 6-cyl gasoline | |
John Deere 5.9L 6-cyl gasoline | |
John Deere 5.9L 6-cyl LP gas |
Engine Detail | |
John Deere | |
diesel | |
6-cylinder 12-valve | |
liquid-cooled inline | |
Oil capacity on most 4020 diesels increased from 8 to 12 quarts starting with the 1969 model year, tractor serial number 201,000. High-crop diesel tractors retained the 8-quart capacity throughout the production run. Tractors fitted with after-market turbochargers, and early tractors with replacement oil pans, may also have the higher oil capacity. | |
Displacement: | 404 ci 6.6 L |
Bore/Stroke: | 4.25x4.75 inches 108 x 121 mm |
Compression: | 16.5:1 |
Rated RPM: | 2200 |
Idle RPM: | 600-2500 |
Operating RPM: | 1500-2200 |
Firing order: | 1-5-3-6-2-4 |
Starter volts: | 24 |
Coolant capacity: | 24 qts 22.7 L |
Intake valve clearance: | 0.018 inches 0.457 mm |
Exhaust valve clearance: | 0.018 inches 0.457 mm |
Engine Oil | |
Early Oil capacity: | 8 qts 7.6 L |
Late Oil capacity: | 12 qts 11.4 L |
Engine Detail | |
John Deere | |
gasoline | |
6-cylinder 12-valve | |
liquid-cooled inline | |
Original gasoline and LP-gas engine, used through the 1965 model year. | |
Displacement: | 340 ci 5.6 L |
Bore/Stroke: | 4.25x4.00 inches 108 x 102 mm |
Compression: | 7.5:1 |
Rated RPM: | 2200 |
Idle RPM: | 650-2500 |
Operating RPM: | 1500-2200 |
Firing order: | 1-5-3-6-2-4 |
Starter volts: | 12 |
Coolant capacity: | 24 qts 22.7 L |
Sparkplug gap: | 0.025 inches 0.635 mm |
Point gap: | 0.016 inches 0.406 mm |
Intake valve clearance: | 0.015 inches 0.381 mm |
Exhaust valve clearance: | 0.028 inches 0.711 mm |
Engine Oil | |
Oil capacity: | 9 qts 8.5 L |
Engine Detail | |
John Deere | |
gasoline | |
6-cylinder 12-valve | |
liquid-cooled inline | |
The larger, 362 ci engine became available in 1966, replacing 340 ci engine. | |
Displacement: | 362 ci 5.9 L |
Bore/Stroke: | 4.25x4.25 inches 108 x 108 mm |
Compression: | 7.5:1 |
Rated RPM: | 2200 |
Firing order: | 1-5-3-6-2-4 |
Starter volts: | 12 |
Oil capacity: | 8 qts 7.6 L |
Coolant capacity: | 24 qts 22.7 L |
Engine Detail | |
John Deere | |
LP gas | |
6-cylinder 12-valve | |
liquid-cooled inline | |
Displacement: | 362 ci 5.9 L |
Bore/Stroke: | 4.25x4.25 inches 108 x 108 mm |
Compression: | 9.0:1 |
Rated RPM: | 2200 |
Firing order: | 1-5-3-6-2-4 |
Starter volts: | 12 |
Oil capacity: | 8 qts 7.6 L |
Coolant capacity: | 24 qts 22.7 L |
1963 - 1972 |
New Generation Series |
Row-Crop tractor |
Transmissions overview | |
8-speed partially synchronized | |
8-speed full power shift |
Transmission | |||
Transmission: | John Deere Syncro-Range | ||
Type: | partially synchronized | ||
Gears: | 8 forward and 2 reverse | ||
Oil capacity: | 52 qts 49.2 L | ||
Oil type: |
| ||
Synchro-Range requires the tractor to be stopped and clutch depressed to select one of four shift stations. Once a station is selected the tractor can be shifted on the move between the two forward gears (and single reverse in stations 1 and 2) by using the clutch. |
Speeds | |
Row-crop tractor with 15.5-38 rear tires. | |
Transmission | |||
Transmission: | John Deere Power Shift | ||
Type: | full power shift | ||
Gears: | 8 forward and 4 reverse | ||
Oil capacity: | 68 qts 64.4 L | ||
Oil type: |
| ||
Power Shift allows shift-on-the-move between gears without clutching. |
Speeds | |
Row-crop tractor with 15.5-38 rear tires. | |
1963 - 1972 |
New Generation Series |
Row-Crop tractor |
John Deere 4020 Tires | |
Ag front: | 6.00-16 (row crop) |
7.50-18 (standard) | |
Ag rear: | 15.5-38 (row crop) |
18.4-34 (standard) |
Dimensions | |
Row crop Wheelbase: | 97.5 inches 247 cm |
Standard Wheelbase: | 100.25 inches 254 cm |
Length: | 151 inches 383 cm |
Width: | 89.6 inches 227 cm |
Rear axle: | Regular axle: 3.375 by 91 inches 85 by 2311 mm |
Rear axle: | Long axle: 3.375 by 104 inches 85 by 2641 mm |
Rear axle: | Extra long axle: 3.375 by 112 inches 85 by 2844 mm |
Front tread: | 48.5 to 82.25 inches 123 to 208 cm |
Rear tread: | 60 to 91 inches 152 to 231 cm |
Rear tread: | 66 to 97 inches 167 to 246 cm (long axle) |
Rear tread: | 67 to 105 inches 170 to 266 cm (extra long axle) |
John Deere 4020 Weight | |
Shipping: | 8,436 lbs 3826 kg (diesel syncro) |
8,225 lbs 3730 kg (gas syncro) | |
8,319 lbs 3773 kg (LP syncro) | |
Operating: | 8,645 lbs 3921 kg (gas syncro) |
8,945 lbs 4057 kg (diesel syncro) | |
9,240 lbs 4191 kg (gas powershift) | |
9,560 lbs 4336 kg (diesel powershift) | |
Ballasted: | 13,980 lbs 6341 kg *Diesel Powershift with 18.4-34 rear tires with fluid plus front and rear cast iron weights. |
John Deere 4020 Height | |
Row-crop Steering wheel: | 77.9 inches 197 cm |
Standard Steering wheel: | 78.25 inches 198 cm |
Standard Exhaust: | 88.25 inches 224 cm |
Row crop Exhaust: | 88.75 inches 225 cm |
1963 - 1972 |
New Generation Series |
Row-Crop tractor |
John Deere 148 Loader | |
Loader weight: | 1350 lbs 612 kg |
Height (to pin): | 126 inches 320 cm |
Clearance, dumped bucket: | 102 inches 259 cm |
Dump reach: | 32 inches 81 cm |
Dump angle: | 38° |
Clearance, level bucket: | 121 inches 307 cm |
Rollback angle: | 11° |
Breakout force (lift): | 4700 lbs 2131 kg |
Lift to full height (at pin): | 3100 lbs 1406 kg |
Bucket capacity: | 0.5 cu yd 0.4 cu m |
0.6 cu yd 0.5 cu m | |
0.8 cu yd 0.6 cu m | |
0.9 cu yd 0.7 cu m | |
Bucket width: | 60 inches 152 cm |
72 inches 182 cm | |
84 inches 213 cm | |
96 inches 243 cm |
John Deere 158 Loader | |
Loader weight: | 1771 lbs 803 kg |
Height (to pin): | 156 inches 396 cm |
Clearance, dumped bucket: | 132 inches 335 cm |
Dump reach: | 32 inches 81 cm |
Dump angle: | 37° |
Clearance, level bucket: | 151 inches 383 cm |
Rollback angle: | 12° |
Breakout force (lift): | 5000 lbs 2268 kg |
Lift to full height (at pin): | 3800 lbs 1723 kg |
Bucket capacity: | 0.5 cu yd 0.4 cu m |
0.6 cu yd 0.5 cu m | |
0.8 cu yd 0.6 cu m | |
0.9 cu yd 0.7 cu m | |
Bucket width: | 60 inches 152 cm |
72 inches 182 cm | |
84 inches 213 cm | |
96 inches 243 cm |
John Deere 48 Loader | |
Loader weight: | 1220 lbs 553 kg |
Height (to pin): | 126 inches 320 cm |
Clearance, dumped bucket: | 104 inches 264 cm |
Dump reach: | 26 inches 66 cm |
Dump angle: | 39° |
Reach at ground: | 68 inches 172 cm |
Breakout force (lift): | 3600 lbs 1632 kg |
Lift to full height (at pin): | 2400 lbs 1088 kg |
Bucket width: | 60 inches 152 cm |
72 inches 182 cm |