1954 - 1956 |
Row-Crop tractor |
Production | |
Manufacturer: | Farmall (a part of International Harvester) |
Type: | Row-Crop tractor |
Factory: | Rock Island, Illinois, USA |
Total built: | 40,957 |
Original price: | $3,500 (1954) |
Variants | |
400: | row-crop |
W-400: | standard |
400 Hi-Clear: | high-crop |
Farmall 400 Power | |
Drawbar (claimed): | 37 hp 27.6 kW |
PTO (claimed): | 45 hp 33.6 kW |
Drawbar (tested): | 48.12 hp 35.9 kW |
Belt (tested): | 52.36 hp 39.0 kW |
power test details ... |
Farmall 400 Engines | |
International Harvester 4.3L 4-cyl gasoline | |
International Harvester 4.3L 4-cyl diesel | |
International Harvester 4.3L 4-cyl LP gas | |
Engine details ... |
Mechanical | |
Chassis: | 4x2 2WD |
Steering: | manual |
power optional | |
Brakes: | manual disc |
Cab: | Open operator station. |
Transmission: | 10-speed partial power shift |
Transmission details ... |
Capacity | |
Fuel: | 21.5 gal 81.4 L |
Aux. fuel: | 0.9 gal 3.4 L |
Hydraulic system: | 3.5 gal 13.2 L |
3.63 gal 13.7 L (power steering) |
Hydraulics | |
Type: | Hydra-Touch |
Capacity: | 3.5 gal 13.2 L |
3.63 gal 13.7 L (power steering) | |
Valves: | 3 |
Tractor hitch | |
Type: | IH Fast Hitch (optional) |
Rear lift: | 2,000 lbs 907 kg |
Power Take-off (PTO) | |
Rear PTO: | transmission |
independent (optional) | |
Rear RPM: | 540 |
Engine RPM: | 537@1450 (trans.) 534@1450 (ind.) |
Dimensions & Tires | |
Wheelbase: | 95.75 inches 243 cm |
Weight: | 6,300 lbs 2857 kg |
Front tire: | 6.00-16 |
Rear tire: | 12-38 |
Full dimensions and tires ... |
400 Serial Numbers | |
Location: | Left side of clutch housing |
photo of 400 serial number | |
1954: | 501 |
1955: | 4732 |
1956: | 29065 |
how to read serial numbers... |
Belt Pulley | |
Diameter: | 11 inches 27 cm |
Width: | 7.5 inches 19 cm |
RPM: | 899 |
Speed: | 2,588 ft/min 788.82 meters/min |
Electrical | |
Ground: | positive (6V) |
negative (12V) | |
Charging system: | generator |
Battery volts: | 6 (gas) |
12 (diesel) |
1955 - 1956 |
Nebraska Tractor Test 533 | |||
|
Nebraska Tractor Test 533 | |
Gasoline Torque Amplifier 2WD March 28 - April 8, 1955 Link: Nebraska Tractor Test 533 file | |
Belt power (max): | 51.94 hp 38.7 kW |
Belt fuel use (max): | 4.4 gal/hour 16.7 l/hour |
Drawbar performance | |
Max power: | 45.84 hp 34.2 kW |
Gear 3 used for power test. | |
Max pull: | 6,361 lbs 2885 kg |
Gear 1 used for pull test. |
Nebraska Tractor Test 535 | |||
|
Nebraska Tractor Test 535 | |
Diesel Torque Amplifier 2WD April 8 - 20, 1955 Link: Nebraska Tractor Test 535 file | |
Belt power (max): | 46.61 hp 34.8 kW |
Belt fuel use (max): | 3.4 gal/hour 12.9 l/hour |
Drawbar performance | |
Max power: | 41.20 hp 30.7 kW |
Gear 3 used for power test. | |
Max pull: | 6,476 lbs 2937 kg |
Gear 1 used for pull test. |
Nebraska Tractor Test 572 | |||
|
Nebraska Tractor Test 572 | |
LP gas Torque Amplifier 2WD May 9 - 25, 1956 Link: Nebraska Tractor Test 572 file | |
Belt power (max): | 50.72 hp 37.8 kW |
Belt fuel use (max): | 5.7 gal/hour 21.6 l/hour |
Drawbar performance | |
Max power: | 47.30 hp 35.3 kW |
Gear 3 used for power test. | |
Max pull: | 6,684 lbs 3031 kg |
Gear 1 used for pull test. |
1955 - 1956 |
Engines overview | |
International Harvester 4.3L 4-cyl gasoline | |
International Harvester 4.3L 4-cyl diesel | |
International Harvester 4.3L 4-cyl LP gas |
Engine Detail | |
International Harvester | |
gasoline | |
4-cylinder | |
liquid-cooled vertical I-head | |
Displacement: | 264 ci 4.3 L |
Bore/Stroke: | 4.00x5.25 inches 102 x 133 mm |
Compression: | 6.3:1 |
Rated RPM: | 1450 |
Firing order: | 1-3-4-2 |
Starter volts: | 6 |
Coolant capacity: | 27 qts 25.6 L |
Engine Detail | |
International Harvester | |
diesel | |
4-cylinder | |
liquid-cooled vertical I-head | |
Displacement: | 264 ci 4.3 L |
Bore/Stroke: | 4.00x5.25 inches 102 x 133 mm |
Compression: | 16.5:1 |
Rated RPM: | 1450 |
Firing order: | 1-3-4-2 |
Starter volts: | 12 |
Coolant capacity: | 29 qts 27.4 L |
Engine Detail | |
International Harvester | |
LP gas | |
4-cylinder | |
liquid-cooled vertical I-head | |
Displacement: | 264 ci 4.3 L |
Bore/Stroke: | 4.00x5.25 inches 102 x 133 mm |
Compression: | 8.33:1 |
Rated RPM: | 1450 |
Firing order: | 1-3-4-2 |
Starter volts: | 12 |
Coolant capacity: | 27 qts 25.6 L |
1955 - 1956 |
Transmissions overview | |
5-speed sliding gear | |
10-speed partial power shift |
Transmission | |
Manufacturer: | International Harvester |
Type: | sliding gear |
Gears: | 5 forward and 1 reverse |
Speeds | |
Transmission | |
Transmission: | International Harvester Torque Amplifier |
Type: | partial power shift |
Gears: | 10 forward and 2 reverse |
The Torque Amplifier (TA) uses a planetary gearset to provide a shift between direct-drive (DD) and the TA underdrive. |
Speeds | |
1955 - 1956 |
International Harvester W-400 Tires | |
Ag front: | 6.50-18 |
Ag rear: | 15.00-30 |
Dimensions | |
Length: | 130 inches 330 cm |
Width: | 76 inches 193 cm |
Height: | 93.5 inches 237 cm |
International Harvester W-400 Weight | |
Operating: | 6,158 lbs 2793 kg (gas) |
6,550 lbs 2971 kg (diesel) | |
Ballasted: | 10,453 lbs 4741 kg |