1963 - 1967 |
Standard-tread tractor |
Series: | 706 ← | 806 | → 1206 |
856 ↓ |
Production | |
Manufacturer: | International Harvester |
Type: | Standard-tread tractor |
Total built: | 8,052 |
Original price: | $6,800 (1967) |
Variants | |
IH 806: | standard-tread |
Farmall 806: | row-crop |
International Harvester 806 Power | |
Drawbar (claimed): | 86.6 hp 64.6 kW |
PTO (claimed): | 94.93 hp 70.8 kW |
International Harvester 806 Engines | |
International Harvester 5.9L 6-cyl diesel | |
Interntional Harvester 4.9L 6-cyl gasoline | |
International Harvester 4.9L 6-cyl LP gas | |
Engine details ... |
Mechanical | |
Chassis: | 4x2 2WD |
4x4 MFWD 4WD (optional) | |
Steering: | hydrostatic power |
Brakes: | hydraulic dry disc |
Cab: | Open operator station |
Transmissions: | 8-speed unsynchronized |
16-speed partial power shift | |
Transmission details ... |
Capacity | |
Fuel: | 42 gal 159.0 L |
48 gal 181.7 L (LP) | |
Hydraulic system: | 17 gal 64.3 L |
Hydraulics | |
Type: | open center |
Capacity: | 17 gal 64.3 L |
Pump flow: | 12 gpm 45.4 lpm |
3 gpm 11.4 lpm (PTO pump) | |
Total flow: | 24 gpm 90.8 lpm |
Steering flow: | 9 gpm 34.1 lpm |
Tractor hitch | |
Rear Type: | II |
Type: | IH Fast Hitch |
Power Take-off (PTO) | |
Rear PTO: | independent |
Rear RPM: | 1000 |
540/1000 |
Dimensions & Tires | |
Wheelbase: | 91 inches 231 cm |
Weight: | 8460 to 9220 pounds |
Front tire: | 7.50-20 |
Rear tire: | 18.4-34 |
Full dimensions and tires ... |
806 Serial Numbers | |
1963: | 501 |
1964: | 1403 |
1965: | 3758 |
1966: | 5917 |
1967: | 7409 |
how to read serial numbers... |
Electrical | |
Ground: | negative |
Charging system: | generator |
Charging amps: | 25 |
Batteries: | 2 (diesel) |
1 (gas/LP) | |
Battery volts: | 6 (diesel) |
12 (gas/LP) | |
Battery AH: | 170 (diesel) |
60 (gas/LP) |
1963 - 1967 |
Row-Crop tractor |
Series: | 706 | → 806 |
756 ↓ |
Production | |
Manufacturer: | Farmall (a part of International Harvester) |
Type: | Row-Crop tractor |
Total built: | 46,146 |
Original price: | $6,100 (1967) |
The 706 was available with a new Torque Amplifier design that prevented free-wheeling when going downhill. An over-center hand clutch was an option, usually found on Wheatland (standard tread) models. The 706 was available with either the Fast Hitch or a standard 3-point hitch. The PTO featured both 540 and 1000 RPM shafts, both of which turned while in use. |
Variants | |
Farmall 706: | row-crop |
IH 706: | standard-tread |
IH 2706: | industrial |
706 Hi-Clear: | high-crop |
Farmall 706 Power | |
Engine (gross): | 89 hp 66.4 kW |
Drawbar (claimed): | 65 hp 48.5 kW |
PTO (claimed): | 73.5 hp 54.8 kW |
Drawbar (tested): | 67.46 hp 50.3 kW |
PTO (tested): | 76.56 hp 57.1 kW |
power test details ... |
Farmall 706 Engines | |
International Harvester 4.6L 6-cyl diesel | |
International Harvester 5.1L 6-cyl diesel | |
International Harvester 4.3L 6-cyl gasoline | |
Interntional Harvester 4.8L 6-cyl gasoline | |
Engine details ... |
Mechanical | |
Chassis: | 4x2 2WD |
4x4 MFWD 4WD | |
Steering: | hydrostatic power |
Brakes: | hydraulic dry double disc |
Cab: | Cab optional, A/C available starting in 1966 |
Transmissions: | 8-speed |
16-speed | |
Transmission details ... |
Capacity | |
Fuel: | 33 gal 124.9 L (gas/diesel) |
39 gal 147.6 L (LP gas) | |
Hydraulic system: | 17 gal 64.3 L |
Hydraulics | |
Type: | open center |
Capacity: | 17 gal 64.3 L |
Valves: | 1 or 2 |
Pump flow: | 12 gpm 45.4 lpm |
17 gpm 64.3 lpm (optional) | |
3 gpm 11.4 lpm (PTO pump) | |
Steering flow: | 9 gpm 34.1 lpm |
Tractor hitch | |
Rear Type: | 2 |
Type: | IH Fast Hitch |
Power Take-off (PTO) | |
Rear PTO: | independent |
Rear RPM: | 540/1000 |
1000 | |
Engine RPM: | 540@2100 1000@2100 |
Dimensions & Tires | |
Wheelbase: | 97.5 inches 247 cm (2WD) |
94.75 inches 240 cm (4WD) | |
Weight: | 7530 to 9160 pounds |
Front tire: | 6.50-16 |
Rear tire: | 15.5-38 |
Full dimensions and tires ... |
Farmall 706 attachments | |
front-end loader | |
Attachment details ... |
706 Serial Numbers | |
Location: | Serial number plate on the left side of the 706 clutch housing. |
photo of 706 serial number | |
1963: | 501 |
1964: | 7073 |
1965: | 21162 |
1966: | 30288 |
1967: | 38521 |
Final: | 46647 |
how to read serial numbers... |
Belt Pulley | |
Diameter: | 11 inches 27 cm |
Width: | 7.5 inches 19 cm |
RPM: | 1055 |
Speed: | 3,038 ft/min 925.98 meters/min |
Electrical | |
Ground: | negative |
Charging amps: | 25 (generator) |
32 (alternator) | |
Batteries: | 1 (gas) |
2 (diesel) | |
Battery volts: | 12 (gas) |
6 (diesel) | |
Battery AH: | 60 (gas/LP) |
130 (diesel) |
1963 - 1967 |
Standard-tread tractor |
Series: | 706 | → 806 |
756 ↓ |
Nebraska Tractor Test 856 | |||
|
Nebraska Tractor Test 856 | |
282 diesel Torque Amplifier 2WD October 21 - November 8, 1963 Link: Nebraska Tractor Test 856 file | |
PTO performance | |
Power at rated engine speed: | 72.42 hp 54.0 kW |
Fuel use: | 5.5 gal/hour 20.8 l/hour |
Power at rated PTO speed: | 67.26 hp 50.2 kW |
Fuel use: | 5.1 gal/hour 19.3 l/hour |
Drawbar performance | |
Max power: | 65.12 hp 48.6 kW |
Fuel use: | 5.4 gal/hour 20.4 l/hour |
Gear 2-High-TA used for power test. | |
Max pull: | 8,026 lbs 3640 kg |
Gear 3-Low-TA used for pull test. |
Nebraska Tractor Test 858 | |||
|
Nebraska Tractor Test 858 | |
263 gasoline Torque Amplifier 2WD October 30 - November 20, 1963 Link: Nebraska Tractor Test 858 file | |
PTO performance | |
Power at rated engine speed: | 73.82 hp 55.0 kW |
Fuel use: | 5.7 gal/hour 21.6 l/hour |
Power at rated PTO speed: | 68.77 hp 51.3 kW |
Fuel use: | 5.2 gal/hour 19.7 l/hour |
Drawbar performance | |
Max power: | 66.18 hp 49.4 kW |
Fuel use: | 5.9 gal/hour 22.3 l/hour |
Gear 2-High-TA used for power test. | |
Max pull: | 7,976 lbs 3617 kg |
Gear 3-Low-TA used for pull test. |
Nebraska Tractor Test 955 | |||
|
Nebraska Tractor Test 955 | |
310 diesel Torque Amplifier 2WD November 14 - 28, 1966 Link: Nebraska Tractor Test 955 file | |
PTO performance | |
Power at rated engine speed: | 76.09 hp 56.7 kW |
Fuel use: | 5.0 gal/hour 18.9 l/hour |
Power at rated PTO speed: | 71.84 hp 53.6 kW |
Fuel use: | 4.7 gal/hour 17.8 l/hour |
Drawbar performance | |
Max power: | 67.46 hp 50.3 kW |
Fuel use: | 5.0 gal/hour 18.9 l/hour |
Gear 1-High-Direct used for power test. | |
Max pull: | 8,416 lbs 3817 kg |
Gear 3-Low-TA used for pull test. |
Nebraska Tractor Test 956 | |||
|
Nebraska Tractor Test 956 | |
291 LP gas Torque Amplifier 2WD November 14 - 28, 1966 Link: Nebraska Tractor Test 956 file | |
PTO performance | |
Power at rated engine speed: | 76.3 hp 56.9 kW |
Fuel use: | 8.4 gal/hour 31.8 l/hour |
Power at rated PTO speed: | 70.98 hp 52.9 kW |
Fuel use: | 7.6 gal/hour 28.8 l/hour |
Drawbar performance | |
Max power: | 66.53 hp 49.6 kW |
Fuel use: | 8.3 gal/hour 31.4 l/hour |
Gear 1-High-Direct used for power test. | |
Max pull: | 8,387 lbs 3804 kg |
Gear 3-Lo-TA used for pull test. |
Nebraska Tractor Test 957 | |||
|
Nebraska Tractor Test 957 | |
291 gas Torque Amplifier 2WD November 16 - 28, 1966 Link: Nebraska Tractor Test 957 file | |
PTO performance | |
Power at rated engine speed: | 76.56 hp 57.1 kW |
Fuel use: | 6.3 gal/hour 23.8 l/hour |
Power at rated PTO speed: | 71.8 hp 53.5 kW |
Fuel use: | 5.8 gal/hour 22.0 l/hour |
Drawbar performance | |
Max power: | 65.67 hp 49.0 kW |
Fuel use: | 6.3 gal/hour 23.8 l/hour |
Gear 1-High-DD used for power test. | |
Max pull: | 8,387 lbs 3804 kg |
Gear 3-Low-TA used for pull test. |
1963 - 1967 |
Standard-tread tractor |
Series: | 706 | → 806 |
756 ↓ |
Engines overview | |
International Harvester 4.6L 6-cyl diesel | |
International Harvester 5.1L 6-cyl diesel | |
International Harvester 4.3L 6-cyl gasoline | |
Interntional Harvester 4.8L 6-cyl gasoline |
Engine Detail | |
International Harvester D282 | |
diesel | |
6-cylinder | |
liquid-cooled | |
The 282 was the original diesel available for the 706. It was later replaced by the German-built 310 diesel. | |
Displacement: | 282 ci 4.6 L |
Bore/Stroke: | 3.6875x4.3906 inches 94 x 112 mm |
Rated RPM: | 2300 |
Firing order: | 1-5-3-6-2-4 |
Coolant capacity: | 21.5 qts 20.3 L |
Intake valve clearance: | 0.027 inches 0.686 mm (hot) |
Exhaust valve clearance: | 0.027 inches 0.686 mm (hot) |
Engine Oil | |
Oil capacity: | 9 qts 8.5 L |
Engine Detail | |
International Harvester D310 | |
diesel | |
6-cylinder | |
liquid-cooled | |
The 310 replaced the 282 diesel in November 1966, serial number 37237. | |
Displacement: | 310 ci 5.1 L |
Bore/Stroke: | 3.875x4.375 inches 98 x 111 mm |
Rated RPM: | 2300 |
Engine Detail | |
International Harvester C263 | |
gasoline | |
6-cylinder | |
liquid-cooled | |
The 263 was also available as an LP gas engine. | |
Displacement: | 263 ci 4.3 L |
Bore/Stroke: | 3.5625x4.3906 inches 90 x 112 mm |
Rated RPM: | 2300 |
Coolant capacity: | 20.5 qts 19.4 L (gas) |
21 qts 19.9 L (LP gas) | |
Sparkplug gap: | 0.023 inches 0.584 mm (gas) |
0.015 inches 0.381 mm (LP) | |
Point gap: | 0.020 inches 0.508 mm |
Intake valve clearance: | 0.027 inches 0.686 mm (hot) |
Exhaust valve clearance: | 0.027 inches 0.686 mm (hot) |
Engine Oil | |
Oil capacity: | 9 qts 8.5 L |
Engine Detail | |
Interntional Harvester C291 | |
gasoline | |
6-cylinder | |
liquid-cooled | |
The 291 was also available as an LP gas engine. | |
Displacement: | 291 ci 4.8 L |
Bore/Stroke: | 3.75x4.39 inches 95 x 112 mm |
Compression: | 7.5:1 |
Rated RPM: | 2300 |
1963 - 1967 |
Standard-tread tractor |
Series: | 706 | → 806 |
756 ↓ |
Transmissions overview | |
8-speed | |
16-speed |
Transmission | |||
Transmission: | sliding gear | ||
Gears: | 8 forward and 4 reverse | ||
Clutch: | 12-inch dry disc | ||
Oil capacity: | 68 qts 64.4 L | ||
Oil type: |
| ||
The 706 transmission is controlled by means of two levers. A range lever selects high, low, reverse range, or neutral. A separate speed lever selects one of four speeds. The tractor must be stopped, and the clutch used, to change range or speed gears. |
Speeds | |
With 18.4-30 rear tires. | |
Transmission | |||
Transmission: | Torque Amplifier | ||
Gears: | 16 forward and 8 reverse | ||
Clutch: | 12-inch dry disc | ||
Oil capacity: | 68 qts 64.4 L | ||
Oil type: |
| ||
The Torque Amplifier (TA) provides a hydraulically-actuted under-drive that may be shifted, on the move, with any range and speed selection in the main transmission. Using the TA does not require the clutch or stopping the tractor. With the lever in the forward position, the TA is disengaged and the transmission is in direct drive. To slow the tractor (increasing pulling power) the TA lever should be pulled smoothly and quickly to the rear, engaging the TA. To disengage the TA and return to direct-drive, the TA should be moved forward, with a slight pause at the center position of the lever. |
Speeds | |
With 18.4-30 rear tires. | |
1963 - 1967 |
Standard-tread tractor |
Series: | 706 | → 806 |
756 ↓ |
International Harvester 706 Tires | |
Ag front: | 7.50-18 (2WD) |
11.2-24 (4WD) | |
Ag rear: | 18.4-30 |
Dimensions | |
Wheelbase: | 87.5 inches 222 cm (2WD) |
87 inches 220 cm (4WD) | |
Length: | 149 inches 378 cm (2WD) |
156 inches 396 cm (4WD) | |
Width: | 80 inches 203 cm (min) |
103 inches 261 cm (max) | |
Height (steering wheel): | 80 inches 203 cm (2WD) |
80.5 inches 204 cm (4WD) | |
Clearance (front axle): | 13 inches 33 cm (4WD) |
17 inches 43 cm (2WD) | |
Clearance (drawbar): | 12 inches 30 cm |
Rear axle: | 3.25 inch diameter 82 mm |
Front tread: | 53 inches 134 cm (fixed) |
Front tread: | 56/69/80 inches 142/175/203 cm(adjustable) |
Rear tread: | 60 to 84 inches 152 to 213 cm |
International Harvester 706 Weight | |
Shipping: | 8,100 lbs 3674 kg (gas) |
8,360 lbs 3792 kg (diesel) | |
Operating: | 8,285 lbs 3758 kg (263 gas) |
8,530 lbs 3869 kg (282 diesel) | |
8,700 lbs 3946 kg (291 gas) | |
9,160 lbs 4154 kg (310 diesel) | |
Ballasted: | 10,710 lbs 4858 kg |