1983 - 1986 |
Ten Compact Series |
Compact Utility tractor |
Shibaura built |
Nebraska Tractor Test 1507 | |||
|
Nebraska Tractor Test 1507 | |
Diesel 12/4 gear 2WD March 30 - April 12, 1984 Link: Nebraska Tractor Test 1507 file | |
PTO performance | |
Power at rated engine speed: | 28.60 hp 21.3 kW |
Fuel use: | 2.2 gal/hour 8.3 l/hour |
Power at rated PTO speed: | 28.29 hp 21.1 kW |
Fuel use: | 2.2 gal/hour 8.3 l/hour |
Drawbar performance | |
Max power: | 24.76 hp 18.5 kW |
Fuel use: | 2.2 gal/hour 8.3 l/hour |
Gear 3-3 used for power test. | |
Max pull: | 3,340 lbs 1515 kg |
Gear 2-3 used for pull test. |
Nebraska Tractor Test 1508 | |||
|
Nebraska Tractor Test 1508 | |
Diesel 12/4 synchro 2WD March 30 - April 17, 1984 Link: Nebraska Tractor Test 1508 file | |
PTO performance | |
Power at rated engine speed: | 28.52 hp 21.3 kW |
Fuel use: | 2.3 gal/hour 8.7 l/hour |
Power at rated PTO speed: | 28.30 hp 21.1 kW |
Fuel use: | 2.3 gal/hour 8.7 l/hour |
Drawbar performance | |
Max power: | 24.57 hp 18.3 kW |
Fuel use: | 2.2 gal/hour 8.3 l/hour |
Gear 3-3 used for power test. | |
Max pull: | 2,566 lbs 1163 kg |
Gear 2-3 used for pull test. |
1983 - 1986 |
Ten Compact Series |
Compact Utility tractor |
Shibaura built |
Engine Detail | |
Shibaura | |
diesel | |
3-cylinder | |
liquid-cooled | |
Displacement: | 103.8 ci 1.7 L |
Bore/Stroke: | 3.346x3.947 inches 85 x 100 mm |
Power: | 32 hp 23.9 kW |
Fuel use: | 2.236 gal/hour 8.5 l/hour |
Air cleaner: | dry |
Pre-heating: | glow plugs |
Compression: | 21:1 |
Rated RPM: | 2500 |
Torque: | 70.9 lb-ft 96.1 Nm |
Torque RPM: | 2000 |
Starter volts: | 12 |
Oil capacity: | 6.9 qts 6.5 L |
Coolant capacity: | 7.4 qts 7.0 L |
1983 - 1986 |
Ten Compact Series |
Compact Utility tractor |
Shibaura built |
Transmissions overview | |
12-speed unsynchronized gear | |
12-speed partially synchronized |
Transmission | |
Type: | unsynchronized gear |
Gears: | 12 forward and 4 reverse |
Clutch: | 239mm dry disc |
Oil capacity: | 29.6 qts 28.0 L |
Three gears, plus reverse, in four ranges. |
Speeds | |
With 13.6-24 rear tires. | |
Transmission | |
Type: | partially synchronized |
Gears: | 12 forward and 4 reverse |
Speeds | |
1983 - 1986 |
Ten Compact Series |
Compact Utility tractor |
Shibaura built |
Ford 1910 Tires | |
2WD Standard tires (ag): | Front: 5.50-16. Rear: 13.6-24 |
4WD Standard tires (ag): | Front: 6.00-16. Rear: 13.6-24 |
Lawn/turf front: | 25x8.50-14 (2WD) |
27x8.50-15 (4WD) | |
Lawn/turf rear: | 18.4x16.1 |
Dimensions | |
2WD Wheelbase: | 66.3 inches 168 cm |
4WD Wheelbase: | 66.9 inches 169 cm |
2WD Length: | 122.6 inches 311 cm |
4WD Length: | 123.2 inches 312 cm |
Width: | 57.8 inches 146 cm |
2WD Ground clearance: | 13.7 inches 34 cm |
4WD Ground clearance: | 13.1 inches 33 cm |
Front tread: | 44.9 to 59.5 inches 114 to 151 cm |
Rear tread: | 45.7 to 61 inches 116 to 154 cm |
Ford 1910 Weight | |
2WD : | 2980 lbs 1351 kg |
4WD : | 3246 lbs 1472 kg |
Ballasted: | 4250 lbs 1927 kg *Two-wheel drive tractor with front and rear iron weight, plus liquid in rear 13.6-24 tires. |
Ford 1910 Height | |
2WD Steering wheel: | 61.6 inches 156 cm |
4WD Steering wheel: | 60.5 inches 153 cm |
ROPS: | 87 inches 220 cm |
2WD Exhaust: | 77.4 inches 196 cm |
4WD Exhaust: | 76.7 inches 194 cm |
1983 - 1986 |
Ten Compact Series |
Compact Utility tractor |
Shibaura built |
Attachment overview | |
60" mid-mount mower deck | |
Snowblower | |
Front-end loader | |
Backhoe | |
In addition to the mid-mount mowing deck, the Ford 1910 was matched for the 930A rear finish mower in 59 or 72 inch widths. It could also use the 939 and 940 60-inch rotary cutters, and the 917 flail mowers (62 or 74 inch). In addition to a loader and backhoe, the model 706 10-cubic-foot rear scoop was available. Up to 72-inch front blades and 84-inch rear blades could be fitted on the 1910, and a 96-inch landscape rake. Rear tillers were available in 48 and 54-inch widths. Ford listed two-bottom plows, 82-inch disc harrows, and 72-inch cultivators as matched equipment. |
60" Mower deck | |
Type: | mid-mount Ford 915 |
3-blade | |
Cutting width: | 60 inches 152 cm |
60" Snow blower | |
Type: | rear-mount Ford 715 |
two-stage with hydraulic lift | |
Clearing width: | 60 inches 152 cm |
Ford 770A Loader | |
Loader weight: | 580 lbs 263 kg |
Height (to pin): | 87 inches 220 cm |
Clearance, dumped bucket: | 70 inches 177 cm |
Dump reach: | 30 inches 76 cm |
Dump angle: | 40° |
Reach at ground: | 61 inches 154 cm |
Rollback angle: | 10° |
Breakout force (lift): | 1600 lbs 725 kg |
Lift to full height (at pin): | 600 lbs 272 kg |
Bucket width: | 48 inches 121 cm |
60 inches 152 cm |
Ford 770B Loader | |
Loader weight: | 580 lbs 263 kg |
Height (to pin): | 87 inches 220 cm |
Clearance, dumped bucket: | 70 inches 177 cm |
Dump reach: | 30 inches 76 cm |
Dump angle: | 40° |
Reach at ground: | 61 inches 154 cm |
Rollback angle: | 10° |
Breakout force (lift): | 1600 lbs 725 kg |
Lift to full height (at pin): | 800 lbs 362 kg |
Bucket width: | 48 inches 121 cm |
60 inches 152 cm |
Ford 757A Backhoe | |
Backhoe type: | Ford 757A Backhoe |
Bucket width: | 8 inches 20 cm |
13 inches 33 cm | |
16 inches 40 cm | |
Digging depth: | 76.5 inches 194 cm |
2-Foot flat digging depth: | 74.5 inches 189 cm |
8-Foot flat digging depth: | 40.3 inches 102 cm |
Reach from pivot: | 107 inches 271 cm |
Loading height: | 70 inches 177 cm |
Dipperstick force: | 719 lbs 326 kg |
Ford 758A Backhoe | |
Backhoe type: | Ford 758A Backhoe |
Bucket width: | 8 inches 20 cm |
13 inches 33 cm | |
16 inches 40 cm | |
Digging depth: | 96 inches 243 cm |
2-Foot flat digging depth: | 94 inches 238 cm |
8-Foot flat digging depth: | 56 inches 142 cm |
Reach from pivot: | 140.4 inches 356 cm |
Loading height: | 83.6 inches 212 cm |
Dipperstick force: | 726 lbs 329 kg |