1939 - 1947 |
Row-Crop tractor |
Production | |
Manufacturer: | Farmall (a part of International Harvester) |
Type: | Row-Crop tractor |
Factories: | Chicago, Illinois, USA |
Louisville, Kentucky, USA | |
Total built: | 75,241 |
Original price: | $770 |
The Farmall A and B were nearly identical tractors. The A featured an offset engine and wide front end. The B had a centered engine, seat offset to the right, and narrow front end. |
Variants | |
B: | full width |
BN: | narrow tread |
Farmall B Power | |
Plows: | 1 (16 inch) |
Drawbar (tested): | 16.21 hp 12.1 kW |
Belt (tested): | 18.39 hp 13.7 kW |
power test details ... |
Farmall B Engines | |
International Harvester 1.9L 4-cyl gasoline | |
International Harvester 1.9L 4-cyl kerosene | |
Fuel tank: | 10 gal 37.9 L |
Aux. fuel: | 1 gal 3.8 L |
Engine details ... |
Mechanical | |
Chassis: | 4x2 2WD |
Steering: | manual |
Cab: | Open operator station. |
Transmission: | 4-speed sliding gear |
Transmission details ... |
Power Take-off (PTO) | |
Rear RPM: | 540 |
Dimensions & Tires | |
Weight: | 2400 lbs 1088 kg |
Front tire: | 6-12 |
Rear tire: | 9-24 |
Full dimensions and tires ... |
B Serial Numbers | |
Location: | Seat support bracket |
photo of B serial number | |
1939: | 501 |
1940: | 6744 |
1941: | 41500 |
1942: | 80739 |
1944: | 96390 |
1945: | 113218 |
1946: | 146700 |
1947: | 182964 (Chicago) |
1947: | 200001 (Louisville) |
how to read serial numbers... |
Belt Pulley | |
Diameter: | 8.5 inches 21 cm |
Width: | 6 inches 15 cm |
RPM: | 1157 |
Speed: | 2574 ft/min 784.56 meters/min |
1939 - 1947 |
Row-Crop tractor |
Nebraska Tractor Test 331 | |||
|
Nebraska Tractor Test 331 | |
Gasoline 4-speed 2WD September 25 - 29, 1939 Link: Nebraska Tractor Test 331 file | |
Belt power (max): | 18.39 hp 13.7 kW |
Belt fuel use (max): | 1.6 gal/hour 6.1 l/hour |
Drawbar performance | |
Max power: | 16.21 hp 12.1 kW |
Gear 2 used for power test. | |
Max pull: | 2,377 lbs 1078 kg |
Gear 1 used for pull test. |
Nebraska Tractor Test 332 | |||
|
Nebraska Tractor Test 332 | |
Distillate 4-speed 2WD October 9 - 13, 1939 Link: Nebraska Tractor Test 332 file | |
Belt power (max): | 16.00 hp 11.9 kW |
Belt fuel use (max): | 1.4 gal/hour 5.3 l/hour |
Drawbar performance | |
Max power: | 14.73 hp 11.0 kW |
Fuel use: | 1.2 gal/hour 4.5 l/hour |
Gear 2 used for power test. | |
Max pull: | 2,463 lbs 1117 kg |
Gear 1 used for pull test. |
1939 - 1947 |
Row-Crop tractor |
Engines overview | |
International Harvester 1.9L 4-cyl gasoline | |
International Harvester 1.9L 4-cyl kerosene |
Engine Detail | |
International Harvester C113 | |
gasoline | |
4-cylinder | |
liquid-cooled vertical I-head | |
Displacement: | 113.1 ci 1.9 L |
Bore/Stroke: | 3.00x4.00 inches 76 x 102 mm |
Compression: | 5.33:1 |
Rated RPM: | 1400 |
Firing order: | 1-3-4-2 |
Oil capacity: | 5 qts 4.7 L |
Coolant capacity: | 13.5 qts 12.8 L |
Sparkplug gap: | 0.025 inches 0.635 mm |
Point gap: | 0.020 inches 0.508 mm |
Intake valve clearance: | 0.014 inches 0.356 mm (hot) |
Exhaust valve clearance: | 0.014 inches 0.356 mm (hot) |
Engine Detail | |
International Harvester | |
kerosene | |
4-cylinder | |
liquid-cooled vertical I-head | |
Displacement: | 113.1 ci 1.9 L |
Bore/Stroke: | 3.00x4.00 inches 76 x 102 mm |
Rated RPM: | 1400 |
Firing order: | 1-3-4-2 |
Oil capacity: | 5 qts 4.7 L |
Coolant capacity: | 13.5 qts 12.8 L |
Sparkplug gap: | 0.025 inches 0.635 mm |
Point gap: | 0.020 inches 0.508 mm |
Intake valve clearance: | 0.014 inches 0.356 mm (hot) |
Exhaust valve clearance: | 0.014 inches 0.356 mm (hot) |
1939 - 1947 |
Row-Crop tractor |
Transmission | |
Type: | sliding gear |
Gears: | 4 forward and 1 reverse |
Speeds | |
1939 - 1947 |
Row-Crop tractor |
Farmall B Tires | |
Ag front: | 6-12 |
Ag rear: | 9-24 |
Ag front: | 4.00-15 |
5.00-15 | |
Ag rear: | 9-24 |
Dimensions | |
Length: | 108 inches 274 cm |
Width: | 79.5 inches 201 cm |
Height: | 65 inches 165 cm |
Weight: | 2400 lbs 1088 kg |
Rear tread: | 64/68/72/76 inches 162/172/182/193 cm(wheel in) |
Rear tread: | 80/84/88/92 inches 203/213/223/233 cm(wheel out) |