1963 - 1967 |
Row-Crop tractor |
Series: | 706 | → 806 |
756 ↓ |
Production | |
Manufacturer: | Farmall (a part of International Harvester) |
Type: | Row-Crop tractor |
Total built: | 46,146 |
Original price: | $6,100 (1967) |
The 706 was available with a new Torque Amplifier design that prevented free-wheeling when going downhill. An over-center hand clutch was an option, usually found on Wheatland (standard tread) models. The 706 was available with either the Fast Hitch or a standard 3-point hitch. The PTO featured both 540 and 1000 RPM shafts, both of which turned while in use. |
Variants | |
Farmall 706: | row-crop |
IH 706: | standard-tread |
IH 2706: | industrial |
706 Hi-Clear: | high-crop |
Farmall 706 Power | |
Engine (gross): | 89 hp 66.4 kW |
Drawbar (claimed): | 65 hp 48.5 kW |
PTO (claimed): | 73.5 hp 54.8 kW |
Drawbar (tested): | 67.46 hp 50.3 kW |
PTO (tested): | 76.56 hp 57.1 kW |
power test details ... |
Farmall 706 Engines | |
International Harvester 4.6L 6-cyl diesel | |
International Harvester 5.1L 6-cyl diesel | |
International Harvester 4.3L 6-cyl gasoline | |
Interntional Harvester 4.8L 6-cyl gasoline | |
Engine details ... |
Mechanical | |
Chassis: | 4x2 2WD |
4x4 MFWD 4WD | |
Steering: | hydrostatic power |
Brakes: | hydraulic dry double disc |
Cab: | Cab optional, A/C available starting in 1966 |
Transmissions: | 8-speed |
16-speed | |
Transmission details ... |
Capacity | |
Fuel: | 33 gal 124.9 L (gas/diesel) |
39 gal 147.6 L (LP gas) | |
Hydraulic system: | 17 gal 64.3 L |
Hydraulics | |
Type: | open center |
Capacity: | 17 gal 64.3 L |
Valves: | 1 or 2 |
Pump flow: | 12 gpm 45.4 lpm |
17 gpm 64.3 lpm (optional) | |
3 gpm 11.4 lpm (PTO pump) | |
Steering flow: | 9 gpm 34.1 lpm |
Tractor hitch | |
Rear Type: | 2 |
Type: | IH Fast Hitch |
Power Take-off (PTO) | |
Rear PTO: | independent |
Rear RPM: | 540/1000 |
1000 | |
Engine RPM: | 540@2100 1000@2100 |
Dimensions & Tires | |
Wheelbase: | 97.5 inches 247 cm (2WD) |
94.75 inches 240 cm (4WD) | |
Weight: | 7530 to 9160 pounds |
Front tire: | 6.50-16 |
Rear tire: | 15.5-38 |
Full dimensions and tires ... |
Farmall 706 attachments | |
front-end loader | |
Attachment details ... |
706 Serial Numbers | |
Location: | Serial number plate on the left side of the 706 clutch housing. |
photo of 706 serial number | |
1963: | 501 |
1964: | 7073 |
1965: | 21162 |
1966: | 30288 |
1967: | 38521 |
Final: | 46647 |
how to read serial numbers... |
Belt Pulley | |
Diameter: | 11 inches 27 cm |
Width: | 7.5 inches 19 cm |
RPM: | 1055 |
Speed: | 3,038 ft/min 925.98 meters/min |
Electrical | |
Ground: | negative |
Charging amps: | 25 (generator) |
32 (alternator) | |
Batteries: | 1 (gas) |
2 (diesel) | |
Battery volts: | 12 (gas) |
6 (diesel) | |
Battery AH: | 60 (gas/LP) |
130 (diesel) |
1963 - 1967 |
Standard-tread tractor |
Series: | 706 ← | 806 | → 1206 |
856 ↓ |
Production | |
Manufacturer: | International Harvester |
Type: | Standard-tread tractor |
Total built: | 8,052 |
Original price: | $6,800 (1967) |
Variants | |
IH 806: | standard-tread |
Farmall 806: | row-crop |
International Harvester 806 Power | |
Drawbar (claimed): | 86.6 hp 64.6 kW |
PTO (claimed): | 94.93 hp 70.8 kW |
International Harvester 806 Engines | |
International Harvester 5.9L 6-cyl diesel | |
Interntional Harvester 4.9L 6-cyl gasoline | |
International Harvester 4.9L 6-cyl LP gas | |
Engine details ... |
Mechanical | |
Chassis: | 4x2 2WD |
4x4 MFWD 4WD (optional) | |
Steering: | hydrostatic power |
Brakes: | hydraulic dry disc |
Cab: | Open operator station |
Transmissions: | 8-speed unsynchronized |
16-speed partial power shift | |
Transmission details ... |
Capacity | |
Fuel: | 42 gal 159.0 L |
48 gal 181.7 L (LP) | |
Hydraulic system: | 17 gal 64.3 L |
Hydraulics | |
Type: | open center |
Capacity: | 17 gal 64.3 L |
Pump flow: | 12 gpm 45.4 lpm |
3 gpm 11.4 lpm (PTO pump) | |
Total flow: | 24 gpm 90.8 lpm |
Steering flow: | 9 gpm 34.1 lpm |
Tractor hitch | |
Rear Type: | II |
Type: | IH Fast Hitch |
Power Take-off (PTO) | |
Rear PTO: | independent |
Rear RPM: | 1000 |
540/1000 |
Dimensions & Tires | |
Wheelbase: | 91 inches 231 cm |
Weight: | 8460 to 9220 pounds |
Front tire: | 7.50-20 |
Rear tire: | 18.4-34 |
Full dimensions and tires ... |
806 Serial Numbers | |
1963: | 501 |
1964: | 1403 |
1965: | 3758 |
1966: | 5917 |
1967: | 7409 |
how to read serial numbers... |
Electrical | |
Ground: | negative |
Charging system: | generator |
Charging amps: | 25 |
Batteries: | 2 (diesel) |
1 (gas/LP) | |
Battery volts: | 6 (diesel) |
12 (gas/LP) | |
Battery AH: | 170 (diesel) |
60 (gas/LP) |
1963 - 1967 |
Row-Crop tractor |
Series: | 706 ← | 806 | → 1206 |
Nebraska Tractor Test 857 | |||
|
Nebraska Tractor Test 857 | |
Diesel Torque Amplifier 2WD October 22 - 30, 1963 Link: Nebraska Tractor Test 857 file | |
PTO performance | |
Power at rated engine speed: | 94.93 hp 70.8 kW |
Fuel use: | 6.3 gal/hour 23.8 l/hour |
Power at rated PTO speed: | 89.04 hp 66.4 kW |
Fuel use: | 5.9 gal/hour 22.3 l/hour |
Drawbar performance | |
Max power: | 84.77 hp 63.2 kW |
Fuel use: | 6.4 gal/hour 24.2 l/hour |
Gear 2H-TA used for power test. | |
Max pull: | 9,182 lbs 4164 kg |
Gear 3L-TA used for pull test. |
Nebraska Tractor Test 859 | |||
|
Nebraska Tractor Test 859 | |
Gasoline Torque Amplifier 2WD 10/28/1963 Link: Nebraska Tractor Test 859 file | |
PTO performance | |
Power at rated engine speed: | 93.27 hp 69.6 kW |
Fuel use: | 7.4 gal/hour 28.0 l/hour |
Power at rated PTO speed: | 83.99 hp 62.6 kW |
Fuel use: | 6.6 gal/hour 25.0 l/hour |
Drawbar performance | |
Max power: | 80.70 hp 60.2 kW |
Fuel use: | 7.5 gal/hour 28.4 l/hour |
Gear 2H-TA used for power test. | |
Max pull: | 9,003 lbs 4083 kg |
Gear 3L-TA used for pull test. |
Nebraska Tractor Test 861 | |||
|
Nebraska Tractor Test 861 | |
LP-gas Torque Amplifier 2WD November 6 - 26, 1963 Link: Nebraska Tractor Test 861 file | |
PTO performance | |
Power at rated engine speed: | 93.42 hp 69.7 kW |
Fuel use: | 9.6 gal/hour 36.3 l/hour |
Power at rated PTO speed: | 83.20 hp 62.0 kW |
Fuel use: | 8.4 gal/hour 31.8 l/hour |
Drawbar performance | |
Max power: | 81.53 hp 60.8 kW |
Fuel use: | 9.5 gal/hour 36.0 l/hour |
Gear 2H-TA used for power test. | |
Max pull: | 9,072 lbs 4115 kg |
Gear 3L-TA used for pull test. |
1963 - 1967 |
Row-Crop tractor |
Series: | 706 ← | 806 | → 1206 |
Engines overview | |
International Harvester 5.9L 6-cyl diesel | |
International Harvester 4.9L 6-cyl gasoline | |
International Harvester 4.9L 6-cyl LP-gas |
Engine Detail | |
International Harvester D-361 | |
diesel | |
6-cylinder | |
liquid-cooled | |
Displacement: | 361 ci 5.9 L |
Bore/Stroke: | 4.125x4.50 inches 105 x 114 mm |
Air cleaner: | two-stage dry |
Compression: | 17:1 |
Rated RPM: | 2400 |
Idle RPM: | 900-2400 |
Starter volts: | 12 |
Engine Detail | |
International Harvester C-301 | |
gasoline | |
6-cylinder | |
liquid-cooled | |
Displacement: | 301 ci 4.9 L |
Bore/Stroke: | 3.8125x4.39 inches 97 x 112 mm |
Power (gross): | 110 hp 82.0 kW |
Air cleaner: | two-stage dry |
Rated RPM: | 2400 |
Starter volts: | 12 |
Engine Detail | |
International Harvester C-301 | |
LP-gas | |
6-cylinder | |
liquid-cooled | |
Displacement: | 301 ci 4.9 L |
Bore/Stroke: | 3.8125x4.39 inches 97 x 112 mm |
Air cleaner: | two-stage dry |
Rated RPM: | 2400 |
Starter volts: | 12 |
1963 - 1967 |
Row-Crop tractor |
Series: | 706 ← | 806 | → 1206 |
Transmissions overview | |
8-speed unsynchronized | |
16-speed two-speed power shift |
Transmission | |
Type: | unsynchronized |
Gears: | 8 forward and 4 reverse |
Clutch: | 12-inch dry disc |
Four gears (1-4) in low, high, and reverse ranges. |
Speeds | |
With 15.5-38 rear tires. | |
Transmission | |
Transmission: | Torque Amplifier |
Type: | two-speed power shift |
Gears: | 16 forward and 8 reverse |
Clutch: | 12-inch dry disc |
As two-range Torque Amplifer (TA) to the basic transmission. Pulling back on the left-hand TA lever provides a clutchless shift to a lower speed for each gear. Pushing the lever forward return to direct-drive mode. |
Speeds | |
With 15.5-38 rear tires. | |
1963 - 1967 |
Row-Crop tractor |
Series: | 706 ← | 806 | → 1206 |
Farmall 806 Tires | |
Ag front: | 6.50-16 |
Ag rear: | 15.5-38 |
Dimensions | |
Wheelbase: | 101.2 inches 257 cm |
Length: | 161 inches 408 cm |
Width: | 110 inches 279 cm |
Height (steering wheel): | 81 inches 205 cm |
Rear axle: | 3.25 inch diameter 82 mm |
Front tread: | 8/16 inches 20/40 cm |
Rear tread: | 56 to 94 inches 142 to 238 cm |
Farmall 806 Weight | |
Gasoline Shipping: | 7,720 lbs 3501 kg |
Diesel Shipping: | 8,500 lbs 3855 kg |
Ballasted: | 11,895 lbs 5395 kg |
1963 - 1967 |
Row-Crop tractor |
Series: | 706 ← | 806 | → 1206 |
International Harvester 2000 Loader | |
With double-acting lift cylinders. | |
Loader weight: | 1417 lbs 642 kg |
Height (to pin): | 125 inches 317 cm |
Clearance, dumped bucket: | 105 inches 266 cm |
Rollback angle: | 18° |
Breakout force (lift): | 4000 lbs 1814 kg |
Lift to full height (at pin): | 2000 lbs 907 kg |
Bucket width: | 48 inches 121 cm |
60 inches 152 cm |