1954 - 1956 |
Row-Crop tractor |
Production | |
Manufacturer: | Farmall (a part of International Harvester) |
Type: | Row-Crop tractor |
Factory: | Rock Island, Illinois, USA |
Total built: | 40,957 |
Original price: | $3,500 (1954) |
Variants | |
400: | row-crop |
W-400: | standard |
400 Hi-Clear: | high-crop |
Farmall 400 Power | |
Drawbar (claimed): | 37 hp 27.6 kW |
PTO (claimed): | 45 hp 33.6 kW |
Drawbar (tested): | 48.12 hp 35.9 kW |
Belt (tested): | 52.36 hp 39.0 kW |
power test details ... |
Farmall 400 Engines | |
International Harvester 4.3L 4-cyl gasoline | |
International Harvester 4.3L 4-cyl diesel | |
International Harvester 4.3L 4-cyl LP gas | |
Engine details ... |
Mechanical | |
Chassis: | 4x2 2WD |
Steering: | manual |
power optional | |
Brakes: | manual disc |
Cab: | Open operator station. |
Transmission: | 10-speed partial power shift |
Transmission details ... |
Capacity | |
Fuel: | 21.5 gal 81.4 L |
Aux. fuel: | 0.9 gal 3.4 L |
Hydraulic system: | 3.5 gal 13.2 L |
3.63 gal 13.7 L (power steering) |
Hydraulics | |
Type: | Hydra-Touch |
Capacity: | 3.5 gal 13.2 L |
3.63 gal 13.7 L (power steering) | |
Valves: | 3 |
Tractor hitch | |
Type: | IH Fast Hitch (optional) |
Rear lift: | 2,000 lbs 907 kg |
Power Take-off (PTO) | |
Rear PTO: | transmission |
independent (optional) | |
Rear RPM: | 540 |
Engine RPM: | 537@1450 (trans.) 534@1450 (ind.) |
Dimensions & Tires | |
Wheelbase: | 95.75 inches 243 cm |
Weight: | 6,300 lbs 2857 kg |
Front tire: | 6.00-16 |
Rear tire: | 12-38 |
Full dimensions and tires ... |
400 Serial Numbers | |
Location: | Left side of clutch housing |
photo of 400 serial number | |
1954: | 501 |
1955: | 4732 |
1956: | 29065 |
how to read serial numbers... |
Belt Pulley | |
Diameter: | 11 inches 27 cm |
Width: | 7.5 inches 19 cm |
RPM: | 899 |
Speed: | 2,588 ft/min 788.82 meters/min |
Electrical | |
Ground: | positive (6V) |
negative (12V) | |
Charging system: | generator |
Battery volts: | 6 (gas) |
12 (diesel) |
1954 - 1956 |
Row-Crop tractor |
Nebraska Tractor Test 532 | |||
|
Nebraska Tractor Test 532 | |
Gasoline Torque Amplifier 2WD March 28 - April 4, 1955 Link: Nebraska Tractor Test 532 file | |
Belt power (max): | 50.78 hp 37.9 kW |
Belt fuel use (max): | 4.4 gal/hour 16.7 l/hour |
Drawbar performance | |
Max power: | 45.34 hp 33.8 kW |
Gear 3-Direct used for power test. | |
Max pull: | 6,508 lbs 2952 kg |
Gear 1-Direct used for pull test. |
Nebraska Tractor Test 534 | |||
|
Nebraska Tractor Test 534 | |
Diesel Torque Amplifier 2WD April 8 - 16, 1955 Link: Nebraska Tractor Test 534 file | |
Belt power (max): | 46.73 hp 34.8 kW |
Belt fuel use (max): | 3.4 gal/hour 12.9 l/hour |
Drawbar performance | |
Max power: | 43.22 hp 32.2 kW |
Gear 3-Direct used for power test. | |
Max pull: | 6,479 lbs 2938 kg |
Gear 1-TA used for pull test. |
Nebraska Tractor Test 571 | |||
|
Nebraska Tractor Test 571 | |
LP gas Torque Amplifier 2WD May 7 - 28, 1956 Link: Nebraska Tractor Test 571 file | |
Belt power (max): | 52.36 hp 39.0 kW |
Belt fuel use (max): | 5.8 gal/hour 22.0 l/hour |
Drawbar performance | |
Max power: | 48.12 hp 35.9 kW |
Gear 3-Direct used for power test. | |
Max pull: | 6,663 lbs 3022 kg |
Gear 1-TA used for pull test. |
1954 - 1956 |
Row-Crop tractor |
Engines overview | |
International Harvester 4.3L 4-cyl gasoline | |
International Harvester 4.3L 4-cyl diesel | |
International Harvester 4.3L 4-cyl LP gas |
Engine Detail | |
International Harvester C264 | |
gasoline | |
4-cylinder | |
liquid-cooled vertical I-head | |
Displacement: | 264 ci 4.3 L |
Bore/Stroke: | 4.00x5.25 inches 102 x 133 mm |
Fuel system: | 1.25-inch updraft carburetor |
Air cleaner: | oil bath |
Compression: | 6.3:1 |
Rated RPM: | 1450 |
Idle RPM: | 400-1600 |
Firing order: | 1-3-4-2 |
Starter volts: | 6 |
Coolant capacity: | 26 qts 24.6 L |
Sparkplug gap: | 0.023 inches 0.584 mm |
Intake valve clearance: | 0.017 inches 0.432 mm (hot) |
Exhaust valve clearance: | 0.017 inches 0.432 mm (hot) |
Engine Oil | |
Oil capacity: | 8 qts 7.6 L |
Oil change: | 150 h |
Engine Detail | |
International Harvester | |
diesel | |
4-cylinder | |
liquid-cooled vertical I-head | |
Displacement: | 264 ci 4.3 L |
Bore/Stroke: | 4.00x5.25 inches 102 x 133 mm |
Air cleaner: | oil bath |
Compression: | 16.5:1 |
Rated RPM: | 1450 |
Firing order: | 1-3-4-2 |
Starter volts: | 12 |
Coolant capacity: | 29 qts 27.4 L |
Engine Oil | |
Oil capacity: | 9 qts 8.5 L |
Engine Detail | |
International Harvester | |
LP gas | |
4-cylinder | |
liquid-cooled vertical I-head | |
Displacement: | 264 ci 4.3 L |
Bore/Stroke: | 4.00x5.25 inches 102 x 133 mm |
Compression: | 8.33:1 |
Rated RPM: | 1450 |
Firing order: | 1-3-4-2 |
Coolant capacity: | 26 qts 24.6 L |
1954 - 1956 |
Row-Crop tractor |
Transmission | |
Transmission: | Torque Amplifier |
Type: | partial power shift |
Gears: | 10 forward and 2 reverse |
Clutch: | 12-inch dry disc |
Speeds | |
With 12-38 rear tires. | |
1954 - 1956 |
Row-Crop tractor |
Farmall 400 Tires | |
Ag front: | 6.00-16 |
Ag rear: | 12-38 |
Dimensions | |
Wheelbase: | 95.75 inches 243 cm |
Length: | 141.125 inches 358 cm |
Min Width: | 84.5 inches 214 cm |
Max Width: | 107.25 inches 272 cm |
Height (steering wheel): | 80.75 inches 205 cm |
Operating weight: | 6,300 lbs 2857 kg |
Ballasted weight: | 9,600 lbs 4354 kg |
Frame Ground clearance: | 18.5 inches 46 cm |
Clearance (front axle): | 22.5 inches 57 cm |
Clearance (rear axle): | 26.25 inches 66 cm |
Front tread: | 8.375/12.25 inches 21/31 cm(tricycle) |
Front tread: | 57 to 90 inches 144 to 228 cm |
Rear tread: | 50 to 94 inches 127 to 238 cm |
Rear tread: | 50 to 106 inches 127 to 269 cm (long axle) |