1958 - 1979 |
Production | |
Manufacturer: | International Harvester |
Total built: | 66,290 |
Original price: | $8,200 (1979 ) |
The International 140 began as the industrial version of the Farmall 140. Industrial tractors had heavier front axles and foot-operated throttles, among other options. As the Farmall and International brands were merged the differences simply became options that the buyer could order. |
International Harvester 140 Power | |
Engine (gross): | 28 hp 20.9 kW |
Engine (net): | 25 hp 18.6 kW |
PTO (claimed): | 21 hp 15.7 kW |
Drawbar (tested): | 21.25 hp 15.8 kW |
Belt (tested): | 23.02 hp 17.2 kW |
power test details ... |
International Harvester 140 Engine | |
International Harvester 2.0L 4-cyl gasoline | |
Engine details ... |
Mechanical | |
Chassis: | 4x2 2WD |
Steering: | manual worm-and-sector |
Brakes: | differential mechanical contracting band |
Cab: | Open operator station. |
Transmission: | 4-speed sliding gear |
Transmission details ... |
Capacity | |
Fuel: | 11 gal 41.6 L |
Hydraulic system: | 3.38 gal 12.8 L |
Hydraulics | |
Type: | IH Touch-Control |
Capacity: | 3.38 gal 12.8 L |
Total flow: | 4.6 gpm 17.4 lpm |
Tractor hitch | |
Type: | IH Fast Hitch (one-point) |
Power Take-off (PTO) | |
Rear PTO: | transmission |
Rear RPM: | 540 |
Dimensions & Tires | |
Wheelbase: | 71 inches 180 cm |
Weight: | 2700 to 3000 pounds |
Front tire: | 5.00-15 |
Rear tire: | 9.5-24 |
Full dimensions and tires ... |
International Harvester 140 attachments | |
front-end loader | |
Attachment details ... |
140 Serial Numbers | |
Location: | Serial number plate on the left side of the tractor, on the clutch housing. |
1958: | 501 |
1959: | 2011 |
1960: | 8082 |
1961: | 11168 |
1962: | 16637 |
1963: | 21181 |
1964: | 25387 |
1965: | 28408 |
1966: | 31285 |
1967: | 34818 |
1968: | 37352 |
1969: | 39906 |
1970: | 42300 |
1971: | 44424 |
1972: | 46605 |
1973: | 48507 |
1974: | 50720 |
1975: | 54273 |
1976: | 57773 |
1977: | 60839 |
1978: | 63111 |
1979: | 64544 |
how to read serial numbers... |
Electrical | |
Ground: | positive (6V) |
negative (12V) | |
Charging system: | generator (early) |
alternator (late) | |
Battery volts: | 6 (early) |
12 (late) |
1958 - 1973 |
Nebraska Tractor Test 666 | |||
|
Nebraska Tractor Test 666 | |
Gasoline 4-speed 2WD September 3 - 18, 1958 Link: Nebraska Tractor Test 666 file | |
Belt power (max): | 23.02 hp 17.2 kW |
Belt fuel use (max): | 2.0 gal/hour 7.6 l/hour |
Drawbar performance | |
Max power: | 21.25 hp 15.8 kW |
Fuel use: | 2.0 gal/hour 7.6 l/hour |
Gear 2 used for power test. | |
Max pull: | 3,611 lbs 1637 kg |
Gear 1 used for pull test. |
1958 - 1973 |
Engine Detail | |
International Harvester C-123 | |
gasoline | |
4-cylinder | |
liquid-cooled vertical I-head | |
Displacement: | 122.7 ci 2.0 L |
Bore/Stroke: | 3.125x4.00 inches 79 x 102 mm |
Air cleaner: | oil bath |
Compression: | 6.94:1 |
Rated RPM: | 1400 |
Firing order: | 1-3-4-2 |
Starter volts: | 6 (early) |
12 (late) | |
Oil capacity: | 5 qts 4.7 L |
Coolant capacity: | 15.2 qts 14.4 L |
1958 - 1973 |
Transmission | |
Type: | sliding gear |
Gears: | 4 forward and 1 reverse |
Speeds | |
1958 - 1973 |
Farmall 140 Tires | |
Ag front: | 5.00-15 |
Ag rear: | 11.2-24 |
Dimensions | |
Wheelbase: | 71 inches 180 cm |
Length: | 107 inches 271 cm |
Height: | 83 inches 210 cm |
Height (steering wheel): | 65 inches 165 cm |
Operating weight: | 3,000 lbs 1360 kg |
Ballasted weight: | 4,825 lbs 2188 kg |
1958 - 1973 |
International Harvester 1000 Loader | |
Loader weight: | 635 lbs 288 kg |
Clearance, dumped bucket: | 74 inches 187 cm |
Rollback angle: | 15° |
Lift to full height (at pin): | 450 lbs 204 kg |
Bucket width: | 42 inches 106 cm |