1955 - 1956
1955 - 1956 |
Standard-tread tractor |
Production
Production |
Manufacturer: | John Deere
|
Type: | Standard-tread tractor
|
Factory: | Waterloo, Iowa, USA
|
Total built: | 3,485
|
John Deere 80 Power
John Deere 80 Power |
Drawbar (claimed): | 46.32 hp 34.5 kW
|
Belt (claimed): | 57.49 hp 42.9 kW
|
Drawbar (tested): | 60.36 hp 45.0 kW
|
Belt (tested): | 65.33 hp 48.7 kW
|
power test details ... |
1955 - 1956
1955 - 1956 |
Standard-tread tractor |
Nebraska Tractor Test 567
Nebraska Tractor Test 567 |
|
Nebraska Tractor Test 567
Nebraska Tractor Test 567 |
Diesel 6-speed 2WD October 27 - November 1, 1955 Link: Nebraska Tractor Test 567 file |
Belt power (max): | 65.33 hp 48.7 kW
|
Belt fuel use (max): | 3.7 gal/hour 14.0 l/hour
|
Drawbar performance |
Max power: | 60.36 hp 45.0 kW
|
Gear 5 used for power test. |
Max pull: | 7,394 lbs 3353 kg
|
Gear 1 used for pull test. |
John Deere 80 Engine
John Deere 80 Engine |
John Deere 7.7L 2-cyl diesel |
Fuel tank: | 32.5 gal 123.0 L
|
Aux. fuel: | 0.25 gal 0.9 L
|
Engine details ... |
1955 - 1956
1955 - 1956 |
Standard-tread tractor |
Engine Detail
Engine Detail |
John Deere |
diesel |
2-cylinder 4-valve |
liquid-cooled |
Displacement: | 470.7 ci 7.7 L
|
Bore/Stroke: | 6.125x8.00 inches 156 x 203 mm
|
Air cleaner: | oil bath
|
Compression: | 16:1
|
Rated RPM: | 1125
|
Firing order: | 1-2
|
Starter type: | V4 gasoline pony motor
|
Coolant capacity: | 35 qts 33.1 L
|
Mechanical
Mechanical |
Chassis: | 4x2 2WD
|
Steering: | manual
|
| power assist optional
|
Brakes: | mechanical expanding shoe
|
Cab: | Open operator station. Optional steel cab.
|
Transmission: | 6-speed unsynchronized gear
|
Transmission details ... |
1955 - 1956
1955 - 1956 |
Standard-tread tractor |
Transmission
Transmission |
Transmission: | John Deere
|
Type: | unsynchronized gear
|
Gears: | 6 forward and 1 reverse
|
Clutch: | dry disc
|
Speeds
Power Take-off (PTO)
Power Take-off (PTO) |
Rear RPM: | 540
|
Dimensions & Tires
Dimensions & Tires |
Wheelbase: | 85.5 inches 217 cm
|
Weight: | 8300 lbs 3764 kg
|
Front tire: | 7.50-18
|
Rear tire: | 15-34
|
Full dimensions and tires ... |
1955 - 1956
1955 - 1956 |
Standard-tread tractor |
John Deere 80 Tires
John Deere 80 Tires |
Ag front: | 7.50-18
|
Ag rear: | 15-34
|
Dimensions
Dimensions |
Wheelbase: | 85.5 inches 217 cm
|
Length: | 142.75 inches 362 cm
|
Width: | 79.5 inches 201 cm
|
Height: | 81 inches 205 cm
|
Weight: | 8300 lbs 3764 kg
|
Ballasted weight: | 11485 lbs 5209 kg
|
Front tread: | 56.5 inches 143 cm
|
Rear tread: | 64.5/68.5 inches 163/173 cm
|
80 Serial Numbers
80 Serial Numbers |
Location: | Serial number plate on the right side of the John Deere 80, ahead of the pulley and below the fuel filter.
|
photo of 80 serial number
|
1955: | 8000001
|
1956: | 8000776
|
Final: | 8003500
|
how to read serial numbers...
|
Belt Pulley
Belt Pulley |
Diameter: | 12.2 inches 30 cm
|
Width: | 9 inches 22 cm
|
RPM: | 1125
|
Speed: | 3599 ft/min 1096.98 meters/min
|
Electrical
Electrical |
Ground: | positive
|
Battery volts: | 6
|