1998 - 2001 |
5000 Ten Series |
Utility tractor |
Nebraska Tractor Test 1756 | |||
|
Nebraska Tractor Test 1756 | |
Diesel 9-speed 4WD October 15 - 19, 1998 Link: Nebraska Tractor Test 1756 file | |
PTO performance | |
Max power: | 66.49 hp 49.6 kW |
Fuel use: | 4.1 gal/hour 15.5 l/hour |
Power at rated engine speed: | 65.44 hp 48.8 kW |
Fuel use: | 4.0 gal/hour 15.1 l/hour |
1998 - 2001 |
5000 Ten Series |
Utility tractor |
Engine Detail | |
John Deere 4045D | |
diesel | |
4-cylinder | |
liquid-cooled | |
Displacement: | 276 ci 4.5 L |
Bore/Stroke: | 4.19x5.00 inches 106 x 127 mm |
Power: | 81 hp 60.4 kW |
Fuel use: | 4.21 gal/hour 15.9 l/hour |
Compression: | 17.6:1 |
Rated RPM: | 2400 |
Idle RPM: | 825-2600 |
Operating RPM: | 1600-2400 |
Torque: | 179.2 lb-ft 243.0 Nm |
Torque RPM: | 1400 |
Firing order: | 1-3-4-2 |
Starter volts: | 12 |
Coolant capacity: | 11.4 qts 10.8 L |
Coolant change: | 2000 h |
Intake valve clearance: | 0.014 inches 0.356 mm |
Exhaust valve clearance: | 0.018 inches 0.457 mm |
Engine Oil | |
Oil capacity: | 9 qts 8.5 L |
Oil change: | 100 h |
1998 - 2001 |
5000 Ten Series |
Utility tractor |
Transmissions overview | |
9-speed unsynchronized gear | |
9-speed partially synchronized | |
12-speed power shuttle |
Transmission | |
Transmission: | CollarShift |
Type: | unsynchronized gear |
Gears: | 9 forward and 3 reverse |
Clutch: | dry disc |
Oil capacity: | 40 qts 37.9 L |
The Collar Shift transmission is controlled with two levers and the foot clutch. The right-hand lever selects one of three speeds (1-3) or reverse (R). The left-hand lever selects one of three ranges (A-C). The tractor must be stopped, and clutch used, to shift either speed or range. |
Speeds | |
With 16.9-30 rear tires. | |
Transmission | |
Transmission: | SyncShuttle |
Type: | partially synchronized |
Gears: | 9 forward and 3 reverse |
Clutch: | dry disc |
Oil capacity: | 40 qts 37.9 L |
Three speeds (1-3) plus reverse (R) in three ranges (A-C). Synchronized shifting, using the clutch, between the three forward speeds and reverse. Tractor must be stopped, and clutch used, to shift range. |
Speeds | |
With 16.9-30 rear tires. | |
Transmission | |
Transmission: | PowrReverser |
Type: | power shuttle |
Gears: | 12 forward and reverse |
Clutch: | wet disc |
Oil capacity: | 46 qts 43.5 L |
Four speeds (1-4) in three ranges (A-C) with forward-reverse shuttle lever. Direction changes may be done while moving using the left-hand shuttle lever. Speed changes are synchronized using the clutch. Tractor must be stopped, and clutch used, to shift ranges. At tractor start-up, clutch pedal must be cycled once before tractor will move. |
Speeds | |
With 16.9-30 rear tires. | |
1998 - 2001 |
5000 Ten Series |
Utility tractor |
John Deere 5410 Tires | |
2WD Standard tires (ag): | Front: 7.50-16. Rear: 16.9-30 |
4WD Standard tires (ag): | Front: 11.2-24. Rear: 16.9-30 |
Dimensions | |
Wheelbase: | 85.7 inches 217 cm *The Deere operator's manual incorrectly states 80.7 inches. |
2WD Length: | 125.9 inches 319 cm |
4WD Length: | 130.3 inches 330 cm |
Width: | 68.7 inches 174 cm |
2WD Clearance (front axle): | 18.3 inches 46 cm |
4WD Clearance (front axle): | 15.4 inches 39 cm |
2WD Clearance (drawbar): | 19.6 inches 49 cm |
4WD Clearance (drawbar): | 18.8 inches 47 cm |
John Deere 5410 Weight | |
2WD ROPS Shipping: | 5000 lbs 2268 kg |
2WD cab Shipping: | 6000 lbs 2721 kg |
4WD ROPS Shipping: | 5500 lbs 2494 kg |
4WD cab Shipping: | 6500 lbs 2948 kg |
Max Drawbar: | 1,675 lbs 759 kg |
John Deere 5410 Height | |
Steering wheel: | 65.4 inches 166 cm |
2WD Hood: | 57.2 inches 145 cm |
4WD Hood: | 59.1 inches 150 cm |
ROPS: | 91.2 inches 231 cm |
78 inches 198 cm (folded) | |
Cab: | 100.4 inches 255 cm |
1998 - 2001 |
5000 Ten Series |
Utility tractor |
Attachment overview | |
Front-end loader | |
Backhoe |
John Deere 521 Loader | |
Height (to pin): | 122 inches 309 cm |
Clearance, dumped bucket: | 99.8 inches 253 cm |
Dump reach: | 20.2 inches 51 cm |
Dump angle: | 37.4° |
Clearance, level bucket: | 117 inches 297 cm |
Reach at ground: | 62 inches 157 cm |
Breakout force (at pin): | 3485 lbs 1580 kg |
Lift to full height (at pin): | 2500 lbs 1134 kg |
John Deere 541 Loader | |
Height (to pin): | 126 inches 320 cm |
Clearance, dumped bucket: | 103.1 inches 261 cm |
Dump reach: | 34.6 inches 87 cm |
Dump angle: | 43° |
Clearance, level bucket: | 120 inches 304 cm |
Reach at ground: | 70.9 inches 180 cm |
Breakout force (at pin): | 3484 lbs 1580 kg |
Lift to full height (at pin): | 2500 lbs 1134 kg |
John Deere 541 Self-Leveling Loader | |
Height (to pin): | 130 inches 330 cm |
Clearance, dumped bucket: | 100.6 inches 255 cm |
Dump reach: | 33 inches 83 cm |
Dump angle: | 86° |
Clearance, level bucket: | 122.6 inches 311 cm |
Reach at ground: | 83 inches 210 cm |
Breakout force (at pin): | 4125 lbs 1871 kg |
Lift to full height (at pin): | 2800 lbs 1270 kg |
John Deere 49 Backhoe | |
Backhoe type: | John Deere 49 Backhoe |
Weight: | 1533 lbs 695 kg *Backhoe weight without bucket. |
Transport height: | 94 inches 238 cm |
2-Foot flat digging depth: | 115 inches 292 cm |
Reach from pivot: | 149 inches 378 cm |
Loading height: | 92 inches 233 cm |
Bucket Rotation: | 180 |
Swing Arc: | 180 |
Bucket force: | 4575 lbs 2075 kg |
Dipperstick force: | 3175 lbs 1440 kg |