1998 - 2001 |
5000 Ten Series |
Utility tractor |
Nebraska Tractor Test 1754 | |||
|
Nebraska Tractor Test 1754 | |
Diesel 9-speed 4WD October 12 - 19, 1998 Link: Nebraska Tractor Test 1754 file | |
PTO performance | |
Power at rated engine speed: | 46.16 hp 34.4 kW |
Fuel use: | 2.8 gal/hour 10.6 l/hour |
1998 - 2001 |
5000 Ten Series |
Utility tractor |
Engine Detail | |
John Deere 3029D | |
diesel | |
3-cylinder | |
liquid-cooled | |
Displacement: | 179 ci 2.9 L |
Bore/Stroke: | 4.19x4.33 inches 106 x 110 mm |
Power: | 53 hp 39.5 kW |
Compression: | 17.8:1 |
Rated RPM: | 2400 |
Idle RPM: | 825-2600 |
Operating RPM: | 1600-2400 |
Torque: | 119.5 lb-ft 162.0 Nm |
Torque RPM: | 1400 |
Starter volts: | 12 |
Coolant capacity: | 10 qts 9.5 L |
Coolant change: | 2000 h |
Engine Oil | |
Oil capacity: | 9 qts 8.5 L |
Oil change: | 100 h |
1998 - 2001 |
5000 Ten Series |
Utility tractor |
Transmissions overview | |
9-speed unsynchronized gear | |
9-speed partially synchronized | |
12-speed power shuttle |
Transmission | |
Transmission: | Collar Shift |
Type: | unsynchronized gear |
Gears: | 9 forward and 3 reverse |
Clutch: | dry disc |
Oil capacity: | 40 qts 37.9 L |
The Collar Shift transmission is controlled with two levers and the foot clutch. The right-hand lever selects one of three speeds (1-3) or reverse (R). The left-hand lever selects one of three ranges (A-C). The tractor must be stopped, and clutch used, to shift either speed or range. |
Speeds | |
With 16.9-28 rear tires. | |
Transmission | |
Transmission: | SyncShuttle |
Type: | partially synchronized |
Gears: | 9 forward and 3 reverse |
Clutch: | dry disc |
Oil capacity: | 40 qts 37.9 L |
Three speeds (1-3) plus reverse (R) in three ranges (A-C). Synchronized shifting, using the clutch, between the three forward speeds and reverse. Tractor must be stopped, and clutch used, to shift range. |
Speeds | |
With 16.9-28 rear tires. | |
Transmission | |
Transmission: | PowrReverser |
Type: | power shuttle |
Gears: | 12 forward and reverse |
Clutch: | wet disc |
Oil capacity: | 46 qts 43.5 L |
Four speeds (1-4) in three ranges (A-C) with forward-reverse shuttle lever. Direction changes may be done while moving using the left-hand shuttle lever. Speed changes are synchronized using the clutch. Tractor must be stopped, and clutch used, to shift ranges. At tractor start-up, clutch pedal must be cycled once before tractor will move. |
Speeds | |
With 16.9-28 rear tires. | |
1998 - 2001 |
5000 Ten Series |
Utility tractor |
John Deere 5210 Tires | |
2WD Standard tires (ag): | Front: 6.50-16. Rear: 13.6-28 |
4WD Standard tires (ag): | Front: 8.3-24. Rear: 13.6-28 |
Dimensions | |
Wheelbase: | 80.7 inches 204 cm |
2WD Length: | 122.6 inches 311 cm |
4WD Length: | 125.9 inches 319 cm |
Width: | 65.4 inches 166 cm |
2WD Clearance (front axle): | 19.5 inches 49 cm |
4WD Clearance (front axle): | 13.4 inches 34 cm |
2WD Clearance (drawbar): | 15.8 inches 40 cm |
4WD Clearance (drawbar): | 14.9 inches 37 cm |
2WD Front tread: | 56.5 to 76.2 inches 143 to 193 cm |
4WD Front tread: | 51.9 to 78 inches 131 to 198 cm |
Rear tread: | 55.8 to 75.6 inches 141 to 192 cm |
John Deere 5210 Weight | |
2WD ROPS Shipping: | 4205 lbs 1907 kg |
2WD Cab Shipping: | 5270 lbs 2390 kg |
4WD ROPS Shipping: | 4650 lbs 2109 kg |
4WD Cab Shipping: | 5630 lbs 2553 kg |
Max Drawbar: | 1675 lbs 759 kg |
John Deere 5210 Height | |
Steering wheel: | 62.8 inches 159 cm |
2WD Hood: | 56.1 inches 142 cm |
4WD Hood: | 57.2 inches 145 cm |
ROPS: | 88.7 inches 225 cm |
76.7 inches 194 cm *ROPS folded | |
Cab: | 97 inches 246 cm |
1998 - 2001 |
5000 Ten Series |
Utility tractor |
Attachment overview | |
Front-end loader | |
Backhoe |
John Deere 521 Loader | |
Height (to pin): | 122 inches 309 cm |
Clearance, dumped bucket: | 99.8 inches 253 cm |
Dump reach: | 20.2 inches 51 cm |
Dump angle: | 37.4° |
Clearance, level bucket: | 117 inches 297 cm |
Reach at ground: | 62 inches 157 cm |
Breakout force (at pin): | 3485 lbs 1580 kg |
Lift to full height (at pin): | 2500 lbs 1134 kg |
John Deere 541 Loader | |
Height (to pin): | 126 inches 320 cm |
Clearance, dumped bucket: | 103.1 inches 261 cm |
Dump reach: | 34.6 inches 87 cm |
Dump angle: | 43° |
Clearance, level bucket: | 120 inches 304 cm |
Reach at ground: | 70.9 inches 180 cm |
Breakout force (at pin): | 3484 lbs 1580 kg |
Lift to full height (at pin): | 2500 lbs 1134 kg |
John Deere 541 Self-Leveling Loader | |
Height (to pin): | 130 inches 330 cm |
Clearance, dumped bucket: | 100.6 inches 255 cm |
Dump reach: | 33 inches 83 cm |
Dump angle: | 86° |
Clearance, level bucket: | 122.6 inches 311 cm |
Reach at ground: | 83 inches 210 cm |
Breakout force (at pin): | 4125 lbs 1871 kg |
Lift to full height (at pin): | 2800 lbs 1270 kg |
John Deere 49 Backhoe | |
Backhoe type: | John Deere 49 Backhoe |
Weight: | 1533 lbs 695 kg *Backhoe weight without bucket. |
Transport height: | 94 inches 238 cm |
2-Foot flat digging depth: | 115 inches 292 cm |
Reach from pivot: | 149 inches 378 cm |
Loading height: | 92 inches 233 cm |
Bucket Rotation: | 180 |
Swing Arc: | 180 |
Bucket force: | 4575 lbs 2075 kg |
Dipperstick force: | 3175 lbs 1440 kg |