1973 - 1977 |
Generation II Series |
Row-Crop tractor |
Nebraska Tractor Test 1113 | |||
|
Nebraska Tractor Test 1113 | |
Diesel Power Shift 2WD October 13 - 24, 1972 Link: Nebraska Tractor Test 1113 file | |
PTO performance | |
Power at rated engine speed: | 150.66 hp 112.3 kW |
Fuel use: | 9.6 gal/hour 36.3 l/hour |
Drawbar performance | |
Max power: | 127.92 hp 95.4 kW |
Fuel use: | 9.6 gal/hour 36.3 l/hour |
Gear 4 used for power test. | |
Max pull: | 14,478 lbs 6567 kg |
Gear 3 used for pull test. |
1973 - 1977 |
Generation II Series |
Row-Crop tractor |
Engine Detail | |
John Deere | |
aftercooled turbocharged diesel | |
6-cylinder | |
liquid-cooled inline horizontal-shaft | |
Displacement: | 404 ci 6.6 L |
Bore/Stroke: | 4.25x4.75 inches 108 x 121 mm |
Air cleaner: | dry with secondary element |
Pre-heating: | ether injection |
coolant heater*Optional | |
Compression: | 16.0:1 |
Rated RPM: | 2200 |
Firing order: | 1-5-3-6-2-4 |
Starter: | electric |
Starter volts: | 12 |
Oil capacity: | 17 qts 16.1 L |
Coolant capacity: | 36 qts 34.1 L |
1973 - 1977 |
Generation II Series |
Row-Crop tractor |
Transmissions overview | |
8-speed partially synchronized | |
16-speed partial power shift | |
8-speed full power shift |
Transmission | |
Transmission: | John Deere Syncro-Range |
Type: | partially synchronized |
Gears: | 8 forward and 2 reverse |
Clutch: | hydraulic wet disc |
Four shift stations with two gears each, plus reverse gear in the first two shift stations. Tractor must be stopped, and clutch used, to shift between stations. Once in a shift station the tractor may be shifted on the move, using the clutch, between the gears in that station. |
Speeds | |
With 18.4-38 rear tires. | |
Transmission | |
Transmission: | John Deere Quad-Range |
Type: | partial power shift |
Gears: | 16 forward and 6 reverse |
Clutch: | hydraulic wet disc |
Four gears (1-4) in four ranges (A-D). Power shift between gears 1-2 and 3-4 in each range with a synchronized shift (using clutch) between 2-3. Tractor must be stopped to shift range. |
Transmission | |
Transmission: | John Deere Power Shift |
Type: | full power shift |
Gears: | 8 forward and 4 reverse |
Clutch: | hydraulic wet discs |
Speeds | |
With 18.4-38 rear tires. | |
1973 - 1977 |
Generation II Series |
Row-Crop tractor |
John Deere 4630 Tires | |
Ag front: | 10.00-16 |
Ag rear: | 18.4-38 |
Ag front: | 14L-16A |
11.00-16 | |
9.50-20 | |
Ag rear: | 24.5-32 |
20.8-38 |
Dimensions | |
Wheelbase: | 112.65 inches 286 cm |
Length: | 171.2 inches 434 cm |
Height (steering wheel): | 93.6 inches 237 cm |
Height (cab): | 116.9 inches 296 cm |
Operating weight: | 16250 lbs 7371 kg |
Clearance (front axle): | 24.9 inches 63 cm |
Clearance (rear axle): | 28.1 inches 71 cm |
Clearance (drawbar): | 15.4 inches 39 cm |
Rear axle: | Rack-and-pinion: 3.62 by 96 inches 91 by 2438 mm |
Rear axle: | Rack-and-pinion: 3.62 by 108 inches 91 by 2743 mm |
Rear axle: | Rack-and-pinion: 3.62 by 118 inches 91 by 2997 mm |
Rear axle: | Rack-and-pinion: 3.94 by 118 inches 100 by 2997 mm |
Front tread: | 56 to 83.6 inches 142 to 212 cm |
Front tread: | 64 to 95.6 inches 162 to 242 cm |
Front tread: | 72 to 88 inches 182 to 223 cm (4WD) |
Rear tread: | 60 to 105.6 inches 152 to 268 cm |
Rear tread: | 60 to 118 inches 152 to 299 cm |
Rear tread: | 60 to 128.3 inches 152 to 325 cm |
1973 - 1977 |
Generation II Series |
Row-Crop tractor |
John Deere 158 Loader | |
Loader weight: | 1,771 lbs 803 kg |
Height (to pin): | 156 inches 396 cm |
Clearance, dumped bucket: | 132 inches 335 cm |
Dump reach: | 32 inches 81 cm |
Dump angle: | 37° |
Rollback angle: | 12° |
Breakout force (lift): | 5,000 lbs 2268 kg |
Lift to full height (at pin): | 3,800 lbs 1723 kg |
Bucket capacity: | 0.5 cu yd 0.4 cu m |
0.6 cu yd 0.5 cu m | |
0.8 cu yd 0.6 cu m | |
0.9 cu yd 0.7 cu m | |
Bucket width: | 60 inches 152 cm |
72 inches 182 cm | |
84 inches 213 cm | |
96 inches 243 cm |