1973 - 1977 |
Generation II Series |
Row-Crop tractor |
Production | |
Manufacturer: | John Deere |
Type: | Row-Crop tractor |
Factory: | Waterloo, Iowa, USA |
Original price: | $23,000 (1977 ) |
Variants | |
4430: | row-crop |
4430 Hi-Crop: | high clearance |
John Deere 4430 Power | |
PTO (claimed): | 125 hp 93.2 kW |
Drawbar (tested): | 104.99 hp 78.3 kW |
PTO (tested): | 125.88 hp 93.9 kW |
power test details ... |
John Deere 4430 Engine | |
John Deere 6.6L 6-cyl diesel | |
Engine details ... |
Mechanical | |
Chassis: | 4x2 2WD |
4x4 HFWD 4WD | |
Final drives: | planetary |
Differential lock: | hydro-mechanical rear |
Steering: | power |
Brakes: | differential hydraulic wet disc |
Cab: | Optional Roll-Gard ROPS. Optional Sound Gard body and cab. |
Transmissions: | 8-speed partially synchronized |
16-speed partial power shift | |
8-speed full power shift | |
13-speed creeper | |
Transmission details ... |
Capacity | |
Fuel: | 46 gal 174.1 L |
Hydraulic system: | 11 gal 41.6 L |
10 gal 37.9 L (Power Shift) |
Hydraulics | |
Type: | closed center |
Capacity: | 11 gal 41.6 L |
10 gal 37.9 L (Power Shift) | |
Pressure: | 2250 psi 155.1 bar |
Valves: | 1 to 3 |
Pump flow: | 22 gpm 83.3 lpm |
Tractor hitch | |
Rear Type: | II |
Rear lift: | 4550 lbs 2063 kg |
Power Take-off (PTO) | |
Rear PTO: | independent |
Rear RPM: | 540/1000 (1.375) |
Engine RPM: | 540@2200 1000@2200 |
Dimensions & Tires | |
Wheelbase: | 106.6 inches 270 cm |
Weight: | 9732 to 11350 pounds |
Front tire: | 10.00-16 |
Rear tire: | 18.4-38 |
Full dimensions and tires ... |
John Deere 4430 attachments | |
front-end loader | |
Attachment details ... |
4430 Serial Numbers | |
Location: | Serial number plate on the rear of the John Deere 4430, right side, above the PTO shaft. |
photo of 4430 serial number | |
1973: | 1000 |
1974: | 17500 |
1975: | 33050 |
1976: | 47222 |
1977: | 62960 |
how to read serial numbers... |
Electrical | |
Ground: | negative |
Charging system: | alternator |
ROPS Charging amps: | 37 |
Cab Charging amps: | 55 |
Batteries: | 2 |
Battery CCA: | 800 |
Battery volts: | 6 |
Battery Group: | 5D |
1973 - 1977 |
Generation II Series |
Row-Crop tractor |
Nebraska Tractor Test 1110 | |||
|
Nebraska Tractor Test 1110 | |
Diesel Quad-Range 2WD October 5 - 13, 1974 Link: Nebraska Tractor Test 1110 file | |
PTO performance | |
Power at rated engine speed: | 125.88 hp 93.9 kW |
Fuel use: | 8.1 gal/hour 30.7 l/hour |
Drawbar performance | |
Max power: | 104.99 hp 78.3 kW |
Fuel use: | 8.1 gal/hour 30.7 l/hour |
Max pull: | 12032 lbs 5457 kg |
1973 - 1977 |
Generation II Series |
Row-Crop tractor |
Engine Detail | |
John Deere | |
turbocharged diesel | |
6-cylinder | |
liquid-cooled inline horizontal-shaft | |
Displacement: | 404 ci 6.6 L |
Bore/Stroke: | 4.25x4.75 inches 108 x 121 mm |
Fuel system: | direct injection |
Air cleaner: | dry with secondary element |
Pre-heating: | ether injection |
coolant heater*Optional | |
Compression: | 15.5:1 |
Rated RPM: | 2200 |
Idle RPM: | 800-2200 |
Operating RPM: | 1500-2200 |
Firing order: | 1-5-3-6-2-4 |
Starter: | electric |
Starter volts: | 12 |
Coolant capacity: | 30 qts 28.4 L |
32 qts 30.3 L (with heater) | |
Intake valve clearance: | 0.018 inches 0.457 mm |
Exhaust valve clearance: | 0.028 inches 0.711 mm |
Engine Oil | |
Oil capacity: | 17 qts 16.1 L |
Oil change: | 100 h |
1973 - 1977 |
Generation II Series |
Row-Crop tractor |
Transmissions overview | |
8-speed partially synchronized | |
16-speed partial power shift | |
8-speed full power shift | |
13-speed creeper |
Transmission | |
Transmission: | John Deere Syncro-Range |
Type: | partially synchronized |
Gears: | 8 forward and 2 reverse |
Clutch: | hydraulic wet disc |
Oil capacity: | 44 qts 41.6 L |
Four shift stations with two gears each, plus reverse gear in the first two shift stations. Tractor must be stopped, and clutch used, to shift between stations. Once in a shift station the tractor may be shifted on the move, using the clutch, between the gears in that station. |
Speeds | |
With 18.4-38 rear tires. | |
Transmission | |
Transmission: | John Deere Quad-Range |
Type: | partial power shift |
Gears: | 16 forward and 6 reverse |
Clutch: | hydraulic wet disc |
Oil capacity: | 44 qts 41.6 L |
Four gears (1-4) in four ranges (A-D). Power shift between gears 1-2 and 3-4 in each range with a synchronized shift (using clutch) between 2-3. Tractor must be stopped to shift range. |
Speeds | |
With 18.4-38 rear tires. | |
Transmission | |
Transmission: | John Deere Power Shift |
Type: | full power shift |
Gears: | 8 forward and 4 reverse |
Clutch: | hydraulic wet discs |
Oil capacity: | 40 qts 37.9 L |
Speeds | |
With 18.4-38 rear tires. | |
Transmission | |
Transmission: | Syncro-Range Creeper |
Type: | creeper |
Gears: | 13 forward and 4 reverse |
Optional creeper range adds additional speeds to the first five gears of the Syncro-Range transmission. An interlock prevents shifting into gears 6 through 8 while the creeper is engaged. |
1973 - 1977 |
Generation II Series |
Row-Crop tractor |
John Deere 4430 Tires | |
Ag front: | 10.00-16 |
Ag rear: | 18.4-38 |
Ag front: | 7.5L-15 |
11L-15 | |
7.50-18 | |
11.00-16 | |
14L-16A | |
Ag rear: | 23.1-30 |
18.4-34 | |
20.8-34 | |
16.9-38 |
Dimensions | |
Wheelbase: | 106.6 inches 270 cm |
Length: | 160.75 inches 408 cm |
Width: | 89.625 inches 227 cm (axle) |
70.8 inches 179 cm (fenders) | |
82 inches 208 cm (cab fenders) | |
Rear axle: | Rack-and-pinion: 3.39 by 90 inches 86 by 2286 mm |
Rear axle: | Rack-and-pinion: 3.39 by 96 inches 86 by 2438 mm |
Rear axle: | Rack-and-pinion: 3.39 by 104 inches 86 by 2641 mm |
Rear axle: | Rack-and-pinion: 3.62 by 104 inches 91 by 2641 mm |
Rear axle: | Rack-and-pinion: 3.62 by 113 inches 91 by 2870 mm |
Front tread: | 48 to 77.9 inches 121 to 197 cm |
Front tread: | 52 to 85.9 inches 132 to 218 cm |
Front tread: | 58 to 95.9 inches 147 to 243 cm |
Front tread: | 64 to 88 inches 162 to 223 cm (4WD) |
Rear tread: | 60 to 94 inches 152 to 238 cm |
Rear tread: | 60 to 101 inches 152 to 256 cm |
Rear tread: | 61 to 109 inches 154 to 276 cm |
Rear tread: | 61 to 118 inches 154 to 299 cm |
John Deere 4430 Weight | |
ROPS Shipping: | 9732 lbs 4414 kg |
Cab Shipping: | 10762 lbs 4881 kg |
Operating: | 11350 lbs 5148 kg |
Ballasted: | 15060 lbs 6831 kg |
John Deere 4430 Height | |
Steering wheel: | 85.25 inches 216 cm |
Cab: | 114 inches 289 cm |
ROPS Exhaust: | 109.3 inches 277 cm |
Cab Exhaust: | 125.25 inches 318 cm |
1973 - 1977 |
Generation II Series |
Row-Crop tractor |
John Deere 148 Loader | |
Loader weight: | 1350 lbs 612 kg |
Height (to pin): | 126 inches 320 cm |
Clearance, dumped bucket: | 102 inches 259 cm |
Dump reach: | 32 inches 81 cm |
Dump angle: | 38° |
Clearance, level bucket: | 121 inches 307 cm |
Rollback angle: | 11° |
Breakout force (lift): | 4700 lbs 2131 kg |
Lift to full height (at pin): | 3100 lbs 1406 kg |
Bucket capacity: | 0.5 cu yd 0.4 cu m |
0.6 cu yd 0.5 cu m | |
0.8 cu yd 0.6 cu m | |
0.9 cu yd 0.7 cu m | |
Bucket width: | 60 inches 152 cm |
72 inches 182 cm | |
84 inches 213 cm | |
96 inches 243 cm |
John Deere 158 Loader | |
Loader weight: | 1771 lbs 803 kg |
Height (to pin): | 156 inches 396 cm |
Clearance, dumped bucket: | 132 inches 335 cm |
Dump reach: | 32 inches 81 cm |
Dump angle: | 37° |
Clearance, level bucket: | 151 inches 383 cm |
Rollback angle: | 12° |
Breakout force (lift): | 5000 lbs 2268 kg |
Lift to full height (at pin): | 3800 lbs 1723 kg |
Bucket capacity: | 0.5 cu yd 0.4 cu m |
0.6 cu yd 0.5 cu m | |
0.8 cu yd 0.6 cu m | |
0.9 cu yd 0.7 cu m | |
Bucket width: | 60 inches 152 cm |
72 inches 182 cm | |
84 inches 213 cm | |
96 inches 243 cm |