1990 - 1995 |
9200 Series |
Four-wheel Drive (4WD) tractor |
Production | |
Manufacturer: | CaseIH |
Type: | Four-wheel Drive (4WD) tractor |
Factory: | Fargo, North Dakota, USA |
Original price: | $127,000 (1995) |
The 9260 and 9240 were the last of the rigid-frame 4WD with four-wheel steering, in the style of the large J.I. Case "crab steer" tractors. |
Variants | |
9260: | four-wheel steer |
9250: | articulated |
CaseIH 9260 Power | |
Engine: | 300 hp 223.7 kW |
PTO (claimed): | 265 hp 197.6 kW |
CaseIH 9260 Engine | |
Cummins 10.0L 6-cyl diesel | |
Engine details ... |
Mechanical | |
Chassis: | 4x4 4WD |
Steering: | four-wheel hydrostatic power |
Cab: | Cab standard with air-conditioning. Optional deluxe cab adds side and rear windowwipers plus internal storage compartments. |
Transmission: | 12-speed full power shift |
Transmission details ... |
Capacity | |
Fuel: | 200 gal 757.0 L |
Hydraulic system: | 18 gal 68.1 L |
Hydraulics | |
Type: | closed center load sensing pressure compensating |
Capacity: | 18 gal 68.1 L |
Pressure: | 2500 psi 172.4 bar |
Valves: | 4 |
Total flow: | 27 gpm 102.2 lpm |
Tractor hitch | |
Optional Rear Type: | III |
Control: | optional |
Rear lift: | 12,750 lbs 5783 kg |
Power Take-off (PTO) | |
Optional Rear PTO: | independent |
Rear RPM: | 1000 |
Dimensions & Tires | |
Wheelbase: | 124 inches 314 cm |
Weight: | 22,000 lbs 9979 kg |
Front tire: | 20.8-38 |
Rear tire: | 20.8-38 |
Full dimensions and tires ... |
9260 Serial Numbers | |
Location: | Under the left-side steps on front fender |
1990: | JCB0004600 |
1991: | JCB0026501 |
1992: | JCB0028400 |
1993: | JCB0030500 |
1994: | JEE0031773 |
1995: | JEE0032808 |
how to read serial numbers... |
Electrical | |
Ground: | negative |
Battery volts: | 12 |
1990 - 1995 |
9200 Series |
Four-wheel Drive (4WD) tractor |
OCED Tractor Test 1651 | |||
|
OCED Tractor Test 1651 | |
Diesel 12-speed 4WD September 19 - 25, 1991 Link: OCED Tractor Test 1651 file | |
PTO performance | |
Max power: | 271.01 hp 202.1 kW |
Fuel use: | 14.3 gal/hour 54.1 l/hour |
Power at rated engine speed: | 266.01 hp 198.4 kW |
Fuel use: | 14.6 gal/hour 55.3 l/hour |
Drawbar performance | |
Max power: | 237.29 hp 176.9 kW |
Fuel use: | 14.5 gal/hour 54.9 l/hour |
Gear 5 used for power test. | |
Max pull: | 32,363 lbs 14679 kg |
Gear 1 used for pull test. |
1990 - 1995 |
9200 Series |
Four-wheel Drive (4WD) tractor |
Engine Detail | |
Cummins LTA-10 | |
turbocharged aftercooled diesel | |
6-cylinder | |
liquid-cooled | |
Displacement: | 611 ci 10.0 L |
Bore/Stroke: | 4.921x5.354 inches 125 x 136 mm |
Power: | 300 hp 223.7 kW |
Air cleaner: | dual paper elements |
Compression: | 16.0:1 |
Rated RPM: | 2100 |
Torque: | 1015 lb-ft 1376.3 Nm |
Torque RPM: | 1400 |
Starter volts: | 12 |
Oil capacity: | 44 qts 41.6 L |
Coolant capacity: | 54 qts 51.1 L |
1990 - 1995 |
9200 Series |
Four-wheel Drive (4WD) tractor |
Transmission | |
Type: | full power shift |
Gears: | 12 forward and 3 reverse |
Clutch: | hydraulic wet disc |
Full power shift transmission operated with two right-hand levers; one for shifting gears and the other for forward/reverse. Skip-Shift feature allows the transmission to quickly shift from first into higher gears (4th, 6th, 8th). |
Speeds | |
With 18.4x38 tires. | |
1990 - 1995 |
9200 Series |
Four-wheel Drive (4WD) tractor |
CaseIH 9250 Tires | |
Ag front: | 20.8-38 |
Ag rear: | 20.8-38 |
Dimensions | |
Wheelbase: | 131 inches 332 cm |
Length: | 272.9 inches 693 cm |
Minimum Width: | 93.5 inches 237 cm |
Duals Width: | 144.3 inches 366 cm |
Height (exhaust): | 143 inches 363 cm |
Operating weight: | 30,060 lbs 13635 kg (20.8R42 duals) |
Front tread: | 60 to 130 inches 152 to 330 cm |
Rear tread: | 60 to 130 inches 152 to 330 cm |