1951 - 1955 |
Agricultural Crawler tractor |
Production | |
Manufacturer: | Allis Chalmers |
Type: | Agricultural Crawler tractor |
Factory: | Springfield, Illinois, USA |
Total built: | 3,909 |
Allis Chalmers HD15 Power | |
Drawbar (claimed): | 82 hp 61.1 kW |
Belt (claimed): | 105 hp 78.3 kW |
Drawbar (tested): | 104.4 hp 77.9 kW |
Belt (tested): | 117.7 hp 87.8 kW |
power test details ... |
Allis Chalmers HD15 Engine | |
General Motors 7.0L 6-cyl diesel | |
Engine details ... |
Mechanical | |
Chassis: | crawler |
Steering: | hydraulic steering clutches |
Cab: | Open operator station. |
Transmission: | 6-speed |
Transmission details ... |
Capacity | |
Fuel: | 91.5 gal 346.3 L |
Steering: | 10 qts 9.5 L |
Dimensions & Tracks | |
Weight: | 27850 to 30895 pounds |
20-inch tracks | |
Full dimensions and tracks ... |
HD15 Serial Numbers | |
Location: | Steering clutch housing or instrument panel |
1950: | 1 |
1951: | 2 |
1952: | 811 |
1953: | 1858 |
1954: | 2856 |
1955: | 3685 |
Final: | 3909 |
how to read serial numbers... |
Belt Pulley | |
Diameter: | 18 inches 45 cm |
Width: | 15 inches 38 cm |
RPM: | 693 |
Speed: | 3266 ft/min 995.48 meters/min |
1939 - 1947 |
Series: | HD14 |
HD15 ↓ |
Nebraska Tractor Test 362 | |||
|
Nebraska Tractor Test 362 | |
Diesel 6-speed crawler October 15 - November 5, 1940 Link: Nebraska Tractor Test 362 file | |
Belt power (max): | 145.39 hp 108.4 kW |
Belt fuel use (max): | 9.6 gal/hour 36.3 l/hour |
Drawbar performance | |
Max power: | 126.98 hp 94.7 kW |
Gear 2 used for power test. | |
Max pull: | 28,019 lbs 12709 kg |
Gear 1 used for pull test. |
1939 - 1947 |
Series: | HD14 |
HD15 ↓ |
Engine Detail | |
General Motors 6-71 | |
blower diesel | |
6-cylinder | |
liquid-cooled 2-cycle vertical I-head | |
Displacement: | 426 ci 7.0 L |
Bore/Stroke: | 4.25x5.00 inches 108 x 127 mm |
Compression: | 16.0:1 |
Rated RPM: | 1500 |
Starter volts: | 12 |
Oil capacity: | 14 qts 13.2 L |
Coolant capacity: | 48 qts 45.4 L |
1939 - 1947 |
Series: | HD14 |
HD15 ↓ |
Transmissions overview | |
6-speed sliding gear | |
3-speed torque converter |
Transmission | |
Type: | sliding gear |
Gears: | 6 forward and 2 reverse |
Oil capacity: | 40 qts 37.9 L |
Speeds | |
Transmission | |
Type: | torque converter |
Gears: | 3 forward and 1 reverse |
Speeds | |
1939 - 1947 |
Series: | HD14 |
HD15 ↓ |
Allis Chalmers HD14 Tracks |
Dimensions | |
Length: | 165 inches 419 cm |
Width: | 92 inches 233 cm |
Height: | 80 inches 203 cm |
Operating weight: | 28750 lbs 13041 kg |
29330 lbs 13304 kg (HD14C) | |
Gauge: | 68 inches 172 cm |